Starting And Stopping Arua-10; Adjusting Volume; Automatic Execution When Windows Starts; Arvp-10H/ Arvp-10R (Amateur Radio Voip Program) Freeware - Kenwood TS-590SG Manual

Hf/50mhz, in-depth manual

Hide thumbs Also See for TS-590SG:

Table of Contents

08 EXPANSIVE APPLICATION SOFTWARE

8.5.4 Starting and Stopping ARUA-10

To start ARUA-10, after above settings completes, right click the "ARUA-10" icon in the Windows task tray and select "Start"

in the menu.

To stop ARUA-10, right click the "ARUA-10" icon in the Windows task tray and select "Stop" in the menu.

To adjust volume of ARUA-10, right click the ARUA-10 icon in the Windows task tray and select Volume in the menu

and from the volume screen adjust volume.

For details, refer to TS-590SG USB Audio Setting Manual on our website.

ARUA-10 is capable of starting automatically at the start of Windows. With this capability enabled, ARUA-10 starts and

connection is made automatically upon restart of a PC.

To enable this capability, right click the ARUA-10 icon in the Windows task tray and select Other settings in the menu,

and the Setup dialog will appear. In the Other tab, click on the Run automatically at Windows startup checkbox.

We oﬀer the ARVP-10H program at the host station (where TS-590SG is installed) and the ARVP-10R program at the

remote station (which remotely controls the TS-590SG), to support the VoIP function for sending and receiving voice signal

over the network.

Figure 8-12 Main Window of ARVP-10H

Figure 8-13 Main Window of ARVP-10R

Table of Contents

Show Quick Links

Table of Contents