Charging The Rechargeable Battery - ALDI WorkZone WB 12-2 User Manual

GB IRE
Preparation

Charging the rechargeable battery

WARNING!
Risk of electric shock!
A faulty electrical installation or excessive mains voltage may result
in an electric shock.
− Only connect the charger to an easily accessible socket so that
you can quickly disconnect it from the mains in case of a failure.
NOTICE!
Risk of damage!
Failure to properly charge the rechargeable battery may damage
the charger and the cordless drill.
− Charge the rechargeable battery at an ambient temperature
between 0 °C and 45 °C. The ideal temperature for charging
the rechargeable battery is approx. 23 °C.
− Charge the rechargeable battery if the power light shows that
the battery is depleted (red light).
The rechargeable battery only has a low charge for purchase. Therefore, charge the
rechargeable battery before first use. If the power light indicates that the storage bat-
tery power is low (red light), recharge the storage battery.
1. Insert the mains plug of the charger
2. Push the battery release button
rechargeable battery down and out of the cordless drill.
3. Insert the rechargeable battery in the charger so that the contacts of the recharge-
able battery extend into the charger. The rechargeable battery must lock into the
charger.
4. The charge indicator will initially illuminate in red.
The charge indicator will turn green once the rechargeable battery is fully
charged.
During the charge process, the mains plug, charger and rechargeable battery will
warm up. This is due to operational reasons and is not a defect.
5. Let the rechargeable battery cool down to room temperature if it heats up during
the charging process.
6. Pull the mains plug out of the charger.
16 16
meister-service@meister-werkzeuge.de
10
in the socket.
6
on the rechargeable battery
7
and pull the
AFTER SALES SUPPORT
GB
00800 34 99 67 53
IRE