RocketFish RF-TRPM70 Quick Setup Manual

70" Tripod Monopod Combo
RF-TRPM70
QUICK SETUP GUIDE
Before using your new product, please read these
instructions to prevent any damage.
Package contents
• Tripod/Monopod with pan head and quick-release plate
• Extra quick-release plate
• Quick Setup Guide
Features
# Component
1 Leveling bubble
2 Center column
3 Leveling bubble
4 Horizontal tilt lock knob
5 Vertical lock button
6 Quick-release plate locking
lever
7 Quick-release plate
8 Vertical tilt lock knob
9 Handle
10 Pan locking knob
11 Center column locking knob
12 Locking collar
13 Flip-lever leg locks
14 Rubber foot with retractable
leg spike
15 Twist screw monopod leg lock
Description
The tripod base is level when the bubble is within the circle.
Adjustable column provides a quick height adjustment. Loosen the center
column locking knob (11), then pull on the center column to adjust the
height.
The panhead base is level when the bubble is within the circle.
Rotate this knob to loosen/tighten and adjust handle (9) for desired
horizontal tilt.
Push this button to release camera platform for vertical setting.
Pull lever to remove the quick-release plate. Place the quick-release plate back
on the tripod and press the lever back into place to secure the plate into
place.
Mount your camera to this plate, then mount this plate to the tripod.
Rotate this knob to loosen/tighten and adjust the vertical tilt up to 90°.
Rotate horizontal tilt lock knob (4) to loosen/tighten and adjust this handle for
desired horizontal tilt.
Rotate this knob to loosen/tighten and rotate the tripod head horizontally.
Rotate this knob to loosen/tighten and pull the center column (2) for desired
height.
Twist to lock the tripod legs in place to provide maximum stability and
strength.
Lift to adjust the leg height, then close to lock.
Provides secure, non-marring footing. Twist rubber feet counter-clockwise to
reveal leg spikes.
Unscrew the leg locks and extend the leg to the desired length.