RocketFish RF-TRP72 Quick Setup Manual

72" Combo Tripod/Monopod
RF-TRP72
QUICK SETUP GUIDE
Package contents
• Tripod with pan head and quick-release plate
• Extra quick-release plate
• Quick Setup Guide
Features
# Component
1 Leveling bubble
2 Handle length adjustment
screw
3 Horizontal tilt lock handle
4 Vertical tilt lock knob
5 Quick-release plate
6 Quick-release plate locking
lever
7 Leveling bubble
8 Damping adjustment knob
9 Pan locking knob
10 Center column
11 Center column locking knob
12 Locking collar
13 Flip-lever leg locks
14 Rubber foot with retractable
leg spike
15 Twist screw monopod leg lock
Description
The tripod base is level when the bubble is within the circle.
Release the screw and extend the handle to the desired length.
Rotate to loosen/tighten and adjust horizontal tilt.
Adjusts vertical tilt up to 90°.
Mount your camera to this plate, then mount this plate to the tripod.
Secures the quick-release plate to the tripod.
The quick-release plate is level when the bubble is in the center.
Set desired tilt damping strength.
Locks the tripod head so that it will not rotate horizontally.
Adjustable column provides a quick height adjustment. Pull on the center
column to adjust the height.
Locks the center column in place.
Locks the tripod legs in place to provide maximum stability and strength.
Lift to adjust the leg height, then close to lock.
Provides secure, non-marring footing. Twist rubber feet counter-clockwise
to reveal leg spikes.
Unscrew the leg locks and extend the leg to the desired length.