Pairing - SRM PC8 Quick Start Manual

PAIRING

To pair an ANT+™ device in the current Bike Profile, select Pairing from the Main Menu.
The SRM PC8 only supports ANT+™ sensors
- older ANT™ sensors and Bluetooth® smart
sensors are not supported.
Pairing ANT+™ PowerMeter Sensor
Select PowerMeter with SET (Select) key. Press SET
(Search) again to search for an available sensor. The
Search field will display a status bar while the PC8
searches for the PowerMeter.
The PowerMeter must be turned on to be
recognized by the PC8. Please refer to the device
manual for further information.
If a PowerMeter has been found, the Search field will
show CONNECTED and the serial number. Pedal the
PowerMeter for additional device status information
(e.g. slope, rpm). If no connection can be established
- see the „Troubleshooting" section on page 21.
After a PowerMeter has been paired with the PC8, it
can be calibrated/set zero offset by pressing MODE
(Zero Offset). For more information - see the „History"
section on page 14. Press PRO (Back) to return to
the Main Menu.
NOTICE
NOTICE
10