Table of Contents
Advertisement
setup screen
Motion detection
Events of motion detection can be set to trigger event signal output.
1. From the Setup menu, select the
<Event (
2. Click <Event setup>.
3. Select <Motion detection> from
<Event action setup>.
4. Set whether or not to <Enable>.
5. Set <Sensitivity>, <Size> and <Area>.
6. Set whether to use <Detection result
overlay>.
When a motion is detected, its size and
position is marked with a rectangle on
the screen.
Green : All targets detected as
moving.
7. Specify the activation time and
activation condition.
For more information about <Activation
time> and <Action>, refer to "Alarm input".
(page 71)
8. When done, click [Apply (
74_ setup screen
)> tab.
)].
Hide quick links:
Advertisement
Table of Contents
