Table of Contents
Advertisement
2. Click [Auto Set].
The Auto Setting dialog appears.
The <IP Address>, <Subnet Mask>, and <Gateway> will be set automatically.
3. Enter the password.
Enter the password of "admin" account,
which was used to access the network
device.
J
For the security purposes, you are
recommended to use a combination of
numbers, alphabets uppercase and
lowercase and special characters for your
password.
If you want to change the password, refer
to "Administrator password change" of
the user setup. (page 81)
4. Click [OK].
Auto network setup will be completed.
DYNAMIC IP SETUP
Dynamic IP Environment Setup
Example of the Dynamic IP environment
- If a Broadband Router, with a network device connected, is assigned an IP
address by the DHCP server
- Network device is connected to a DHCP based modem directly
- If IPs are assigned by the internal DHCP server via the LAN
Checking the Dynamic IP
1. Run the IP Installer on the user's local
computer.
Network devices allocated with
<Dynamic IP> address are shown in
the list.
2. Select a network device from the
search result.
English _29
Hide quick links:
Advertisement
Table of Contents
