Table of Contents
Advertisement
TAPE DECK ADJUSTMENTS
Tape Speed Adjustment
1. Set the function switch to TAPE.
2. Connect a frequency counter with a 32 ohm dummy load to the stereo headphone jack. (See Figure 3.)
3. Insert and play back a 8 kHz test tape into the tape mechanism.
4. Insert an insulated alignment tool and adjust the tape speed potentiometer until the frequency counter indicates
2940 Hz to 3090 Hz.
Record AC Bias Frequency alignment procedure
1. Insert a cassette tape into the cassette compartment.
2. Connect the frequency counter to the MAIN PCB ( C375).
3. Press the REC button.
4. Adjust T305.
5. Adjust for 61 kHz ± 2 kHz.
MOTOR SPEED ADJ.
Figure3. Tape Speed Adjustment
- 4 -
Hide quick links:
Advertisement
Table of Contents
