Canon iPF785 Series Basic Manual page 67

iPF785 Series
The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
•
poses a risk of injury or bending the Stand.
Caution
• When assembling the Stand, lock all four of the casters. Attempting to move the stand when the casters
are not locked poses a risk of injury or damage to the location site.
Before moving the assembled stand, lift the
•
support rod to the position shown (a) and un-
lock all four casters. Moving the stand with the
support rod lowered or the casters locked may
cause injury or damage the area of installation
or basket cloth.
Install the printer
1
Mount the printer on the assembled Stand and
tighten the screws firmly.
• Moving the printer requires at least three people. Be careful to avoid back strain and other injuries.
When moving the printer, firmly grasp the Car-
•
Caution
rying Handles. The printer may be unsteady if
you hold it at other positions, which poses a
risk of injury from dropping the printer.
• When placing the printer on the Stand, lock all four of the casters of the Stand. Attempting to place the
printer on the Stand while the casters are not locked poses a risk of injury.
Basic Guide
Reinstalling the Printer
67