Do you have a question about the RAM 3500 Dually and is the answer not in the manual?
Questions and answers
Summary of Contents for KidTrax RAM 3500 Dually
Page 1
Styles and colors may vary Made in China The owner’s manual contains assembly, use and maintenance instructions. The RAM 3500 Dually ride-on truck must be assembled by an adult who has read and understands the instructions in this manual. Keep the packaging away from children and dispose of all packaging before use.
Page 2
Thank You For purchasing the RAM 3500 Dually ride-on truck. The truck features L.E.D. running lights, off road lights, dump body with opening tail gate, six tires, and much more! We hope your child will have years of riding enjoyment with our products. We appreciate your business. Please call us at KidTrax Toys...
Battery Warnings The following safety hazards may result in serious injury or death to the user of the RAM 3500 Dually: • Use of a battery or charger other than the supplied KidTrax Toys 12V rechargeable battery and charger may cause a fire or explosion.
WARNING! • Liquids on the battery may cause fire or electric shock. Always keep all liquids away from the battery and keep the battery dry. • Contact or exposure to battery leakage (lead acid) may cause serious injury. If contact or exposure occurs immediately call your physician.
Parts Main Body Components Steering wheel with Rollbar wire connectors Seats(2) Dashboard RAM 3500 Body Includes: Kid Trax 12-volt battery 12V12AH Front body Truck bed Rear wheel (2) Gear box (2) Rear axle Rear Hubcap (2) Doors (2) Note: The rear hubcaps have four snap-in tabs Truck bed hinges (2) Battery charger...
Hardware Most hardware will come attached to the part. Remove the hardware just before the assembly step, and keep handy for installation. Wheel hardware (2 per front wheel Screws for hinges (3 per hinge) 1 per rear wheel) One nylon threaded nut per axle (4) Hex wrench Screws for dashboard attachment (2)
Assembly It’s easiest to perform the following steps from the underside of the RAM body. To avoid scratching the body, perform all assembly steps on a soft surface such as a carpet or cardboard. Insert the Rear Axle 1. Carefully turn the Ram body upside down.
Attach the Truck Bed Hinges 1. Carefully turn the truck bed upside down. 2. Orient each hinge so the hinge tube is facing towards the center of the truck bed and the hinge is on the outside. 3 Align the posts on the underside of the truck bed with the holes on the bottom of the hinge.
Attach the Rear Wheels 1. Slide the rear wheel onto the end of the axle, fitting the back of the rear wheel into the gear box. 2. Insert a washer over the axle. Using the included hex wrench, fasten the nut on the end of the axle and tighten. The axle may need to be shifted left or right to be evenly distributed so for the tires to fit properly.
Attach the Grill Assembly 1. Carefully turn the grill assembly (grill and bumper) upside down. 2. Slide the grill assembly towards the truck body and fasten by: a. Inserting the tube coming from the grill assembly into the tube coming from the front axle.
Attach the Doors 1. Orient the doors so the interior of the door is facing the interior of the car. 2. Insert the post on the bottom of the door into the hole on the side of the car body. 3.
Insert the Steering Rod It’s easiest to accomplish this step with the Ram slightly tipped to it’s side. Have a second person hold the Ram while inserting the steering rod. 1. Remove the screw and nut from the steering wheel, and keep it close by, you will need to hold the steering rod in place.
4. Attach the two blue battery connectors. Note: You will only need to connect the battery to the motor one time. Only use the KidTrax toys 12V charger included with the RAM 3500 (Input: AC 120V, 60Hz Output: DC 6V).
Attach the Seats 1. Orient the locking tab in the same direction as the locking tabs slots. 2. Lower the seat onto locking tabs slots making sure the tabs on the back of the seats snap into the slots in the car body. 3.
Using the RAM 3500 Dually Important! Before using the 3500 Dually for the first time the battery needs to be charged for at least 20- 24 hours. Only an adult who has read and understands the safety warnings (see Assembly) should handle, recharge of the battery.
• Check the battery and charger (supply cord, connector) for wear and damage before charging. Do not charge the battery if damage has occurred. Only replace with a KidTrax Toys 12 volt rechargeable battery and charger. The battery should be charged after each use, or if not used regularly, once a month at a minimum. Charge the battery between 14 and 18 hours.
It is illegal in most areas to incinerate lead acid batteries or dispose of them in landfills. Take it to a federal or state-approved lead acid battery recycler, such as a KidTrax Toys authorized service center or your local automotive battery retailer. Do not throw the battery away with your regular household trash! 6.
KidTrax Toys Consumer Relations. If you still need help resolving the problem please call 877-741-6154. KidTrax Toys recommends that you take the vehicle to an authorized service center for periodic maintenance and service. Call the number listed above for the closest center to you.
Services, Repairs and Parts Do not return this product to the place of purchase. If your RAM 3500 needs service, repairs or replacement parts, call: KidTrax Toys Consumer Relations Hours: 8:00 am – 5:00 pm (CST) Monday - Friday Phone: 877-741-6154 Email: customerservice@kidtraxtoys.com...
To make a claim under this warranty you may contact us at www.kidtraxtoys.com; fax us at 1-800-858-2800, 24 hours a day; write to KidTrax Consumer Relations Department, KidTrax Toys, P.O. Box 344 Olney, IL 62450 or call 1-877-741- 6154 from 8 a.m. to 5 p.m., Monday through Friday, CST. Proof of purchase is required, and shipping charges are the responsibility of the consumer.
Need help?
Do you have a question about the RAM 3500 Dually and is the answer not in the manual?
Questions and answers