Message Reception Mode; Message Waiting Notification-Device - Panasonic KX-TVM50 Feature Manual

2.2 System Features

2.2.30 Message Reception Mode

Description
Determines whether incoming calls are directed to the subscriber's regular mailbox or interview
mailbox.
This mode is effective for: Incomplete Call Handling Service (when the subscriber's line is busy, when
the subscriber cannot take the call, or when the subscriber has enabled Call Blocking), and when the
transfer destination of calls is set to a Logical Extension.
Programming Manual References
"All Calls Transfer to Mailbox" in 2.1.3 Mailbox Parameters
Feature Manual References
2.2.26 Interview Service
2.2.28 Logical Extension (All Calls Transfer to Mailbox)
Subscriber's Manual References
5.5 Message Reception Mode
2.2.31 Message Waiting Notification—Device
Description
Automatically calls a preprogrammed telephone number or beeper (pager) number when subscribers
have new messages. New messages will be automatically played back when the subscriber answers
the call. When a beeper (pager) is called, the subscriber must call the VPS and log in to his or her
mailbox to listen to the messages. Notification can be scheduled either for a maximum of 2 times
during any 24 hour period.
Conditions
• Notification can be sent for all messages, or for only urgent messages depending on the
preprogrammed "Notification Type". When set to "Only Urgent Messages", the device is called
whenever an urgent message is recorded in the mailbox.
• Subscribers can programme a maximum of 3 telephones or beepers (pagers) for use with this
feature. The VPS will recall the preprogrammed telephone a specified number of times if the call
is not answered. If the first device cannot be called, the second (then third) device will be called.
Programming Manual References
2.1.4 Notification Parameters
"Message Waiting Notification" in 2.5.4 Parameters
30 Feature Manual