Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Comelit Icona ViP
Summary of Contents for Comelit Icona ViP
- Page 1 USER MANUAL User manual for the Icona ViP manager Art. 20003310W...
-
Page 2: Table Of Contents
CONTENTS MONITOR DESCRIPTION ...........4 CLIMATE SCHEDULING .................29 LOADS .................30 FUNCTION KEYS ..............5 CONSUMPTION ..............30 SOFT-TOUCH KEY ACTIVATION........5 SWITCHING OFF THE SCREEN .........5 CONSUMPTION/PRODUCTION COMPARISON ...........31 SCENARIOS ................32 ICONA MANAGER MENU ...........6 ACTIVATE A SCENARIO .................32 ALARM MENU STATUS ICONS ..............6 DEACTIVATE A SCENARIO ................32 STATUS ICONS MENU ...................6 AUDIO BROADCAST ............33... - Page 3 Modify a key ....................47 Delete a key.....................48 Alarm .......................48 SETUP - Audio broadcast ................48 IP address .......................48 Port ........................49 Username ......................49 Password ......................49 SETUP - Protection ..................49 User password....................49 Advanced passwords ..................49 Home automation limits ...................50 SETUP - Configure event messages ...............50 SETUP - Advanced .............50 Programming keys...................50 Total reset ......................51...
-
Page 4: Monitor Description
• All the equipment must only be used for the purpose it was designed for. • Comelit Group S.p.A. declines any responsibility for improper use of the apparatus, for any alterations made by others for any reason or for the use of non-original accessories or materials. -
Page 5: Function Keys
FUNCTION KEYS SOFT-TOUCH KEY ACTIVATION Audio key: activates or deactivates conversation with the external unit. • See SETUP menu-General parameters-Soft touch keys Door lock key: opens the corresponding door lock. programmable lock release actuators Programmable key 1: Swipe keys programmable intercom self ignition... -
Page 6: Icona Manager Menu
ICONA MANAGER MENU „ Press the icon to immediately return to the main menu. The icons in the Icona Manger menu vary according to the type of system installed and the functions available. To navigate the menu, simply use your finger to touch the icon corresponding to the desired function. -
Page 7: Favourites Bar, Favourites Page And Advanced Info
FAVOURITES BAR, FAVOURITES PAGE AND 5|30 ADVANCED INFO „ Hold pressed one of the icons in the main menu to open the Scenario 1 corresponding favourites bar / favourites page / advanced info Scenario 2 panel. Full set Full unset Alarms 17:43 System o... -
Page 8: Moving And Removing Favourites
ADVANCED INFO „ When a function is activated, the advanced info relative to that Alarms function is displayed. Setup Lights Scenarios » The fraction displayed indicates how many elements relative to the function are available and how many are active. Thermo 20,0°... -
Page 9: Alarm
ALARM ALARM STATUS √ An alarm is tripped. „ Press the icon to access the alarms menu. Alarms Scenario 1 AL ARM LO G Scenario 2 02/10/2014 17:49:41 Full set Al ar m Full unset T he ft E xpa n sio n 1 |1 17:43 Aree System o... -
Page 10: Reset Alarms
RESET ALARMS The ALARMS MENU keeps track of the alarm in progress. The alarm system can be reset in any of the following 3 ways: 1. From the main screen of the alarms menu, press the RESET ALARMS icon Scenario 1 Scenario 2 2. -
Page 11: Activating The Anti-Intrusion System
ACTIVATING THE ANTI-INTRUSION SYSTEM # OPTION A # OPTION B „ This takes you to the Alarms menu, and then press the „ Press the icon in the main ALARM screen icon to access the options menu. „ Press the CUSTOMISED ACTIVATION icon. •... -
Page 12: Deactivating
DEACTIVATING THE ANTI-INTRUSION SYSTEM # OPTION A # OPTION B „ Access the Alarms menu and then press the icon to „ Press the icon in the main ALARM screen access the options menu. „ Press the CUSTOMISED ACTIVATION icon. •... -
Page 13: Partial Area Activation
PARTIAL AREA ACTIVATION ALARM SETTINGS „ Access the Alarms menu and then press the icon to „ Press the partial activation icon. access the options menu. „ Navigate through the available alarm areas by swiping with your finger to the left or right A L A R M Ca m e ra s Are a 3... -
Page 14: Customised Activation
Customised activation Event log ALARM SETTINGS - Customised activation ALARM SETTINGS - Event log The function allows you to display the areas of the system, the status of each area and to activate/deactivate the alarm system in the chosen areas. Event log A LA R M Alarm log... -
Page 15: Zone And Area Status
Zone and area status Shortcuts ALARM SETTINGS - Shortcuts ALARM SETTINGS - Zone and area status The function is used to check the status of the various zones/areas of This function can be used to select which shortcut buttons (alarm the system configuration. -
Page 16: Exit Controls
Exit controls Phone book ALARM SETTINGS - Exit controls ALARM SETTINGS - Phone book This function enables you to change the status of the system outputs. This function allows you to edit the phone book memorised on the control panel. Telephone 1 Telephone 2 ALARM... -
Page 17: Alarm Options
ALARM OPTIONS OPTIONS - Voice menu SETUP-Anti-intrusion-Voice menu The OPTIONS panel contains a series of submenus dedicated to the various settings of the alarm system. This function - if activated - allows you to partially control and to monitor the control panel via a phone call. ALARM SETUP √... -
Page 18: Options - Auto-Activation
OPTIONS - Auto-activation OPTIONS - Organize dektop SETUP-Anti-intrusion-Organize desktop SETUP-Anti-intrusion-Auto-activation This option allows you to delete the links to Activation controls / ADVANCED FUNCTION - requires login as INSTALLER/ Shortcuts / Output controls previously added to the alarms home MANUFACTURER! page. -
Page 19: Options - Configuration
OPTIONS - Configuration „ Press the icon corresponding to the TONES function to activate/ SETUP-Anti-intrusion-Configuration deactivate system sounds. ADVANCED FUNCTION - requires login as INSTALLER/ MANUFACTURER! » Indicates the function is ACTIVE » Indicates the function is INACTIVE ALARM SETUP RS485 bus address »... -
Page 20: Other / Lights / Irrigation / Automations
OTHER / LIGHTS / IRRIGATION / AUTOMATIONS room 1 room 3 room light 1 Alarms light 2 Alarms Video System Climate light 3 Thermo light 4 20,0° Blinds Other Lights 17:36 02/10/14 Irrigation Automations Loads 1. Selected room 2. Devices in the selected room „... - Page 21 TIME STATE TIME STATE 05:00 05:00 PROG PROG 09:00 09:00 1. Days of the week bar Once you have returned to the main page, you can copy the 2. Time/Status table programmed activity from one day to another: 3. Programming On/Off icon „...
-
Page 22: Door Entry Monitors
DOOR ENTRY MONITORS DOOR ENTRY MONITORS - Open doors DOOR ENTRY MONITORS-Open doors „ Press the icon to access the door entry monitors This function allows you to interrogate a directory of doors (see "Door menu. Video System entry monitors- Doors directory" on page 58) to check their status (open/closed). -
Page 23: Door Entry Monitors - Messages
DOOR ENTRY MONITORS - Messages „ Press the icon VIDEO MESSAGES to access the video memory sub-menu. DOOR ENTRY MONITORS-Messages This function allows you to manage the ViP messaging system of the device. „ Press the icon to access the dedicated sub- VIDEO MEMORY menu. -
Page 24: Door Entry Monitors - Audio Message
DOOR ENTRY MONITORS - Audio message ADVANCED FUNCTION SCHEDULING DOOR ENTRY MONITORS-Audio message The function allows you to enable audio message playback on the device on receipt of an incoming call. (See "DOOR ENTRY MONITORS - Answering service setup" on page 22). SCHEDULING ICONS „... -
Page 25: Dimmer Lights
DIMMER LIGHTS DIMMABLE LIGHTS LIGHT 2 room 1 room 3 room light 1 light 2 light 3 „ Press the cursor and drag it to set the desired timer value. light 4 • YOU can also press and hold on a point of the arc to move the cursor to the required point. -
Page 26: Dimmable Lights With Presence Sensor
DIMMABLE LIGHTS WITH PRESENCE SENSOR • With PRESENCE SENSOR ACTIVATED DIMMABLE LIGHTS WITH PRESENCE SENSOR • You cannot control the function with short presses of the ON/OFF icon. „ Press the ON/OFF icon (LONG PRESS) to increase or reduce the brightness. ONLY WITH THE OUTPUT ACTIVE! room 2 room 3... -
Page 27: Rgb Dimmable Lights
RGB DIMMABLE LIGHTS RGB LIGHTS SCHEDULING DIMMABLE COLOUR CHANGING LIGHTS „ Hold pressed the desired ROOM or DEVICE to open the advanced panel, then select the option SCHEDULING to open the corresponding panel. RGB light TIME 09:00 PROG 09:45 100% 1. -
Page 28: Climate Control
CLIMATE CONTROL „ Press the ON/OFF icon to switch the climate zone on or off. From the climate section you can monitor, set and program room temperatures. „ Press one of the icons to select the desired operating mode: „ Press the icon to access the climate menu. Climate AUTOMATIC mode Climate... -
Page 29: Climate Forcing
CLIMATE FORCING • Daily climate control programming must apply to the whole 24- hour cycle; any hours not programmed by the user will be set by the system automatically. It is possible to force programming (both automatic and manual) for a set period of time (hours or days). -
Page 30: Loads
LOADS CONSUMPTION From the loads section you can activate or deactivate the automatic The consumption function allows you to monitor energy consumption shutdown function for the loads monitored by the home automation through graphs and tables. system. „ Press the icon to access the consumption menu. „... -
Page 31: Consumption/Production Comparison
CONSUMPTION/PRODUCTION COMPARISON If the system includes production units (e.g. solar panels), it can Meter 2 2.33M provide a comparison between energy production and consumption. 1.86M 2011 1.39M 4.15MWh 932k 880W 466k Meter 2 493k 0.00 2011 2012 2013 2014 2015 Year 394k 2014... -
Page 32: Scenarios
SCENARIOS The scenarios function allows you to activate previously programmed SCENARIO scenarios (i.e. a set of conditions relative to the devices of the home automation system). scenario 1 „ Press the icon to access the scenarios menu. scenario 2 Scenarios scenario 3 „... -
Page 33: Audio Broadcast
AUDIO BROADCAST AUDIO BROADCAST - Player screen The audio broadcast function allows you to play music and audio files „ Short press on a player to open the play panel. in the various rooms connected to the home automation manager. „... -
Page 34: Audio Broadcast - Playlist Screen
AUDIO BROADCAST - Playlist screen AUDIO BROADCAST - Scenarios You can enter up to 10 audio broadcast actions in a home automation scenario. „ Scroll to the left to display the PLAYLIST screen „ Select the desired player from those available. SCENARIO Player 1 Playlist... -
Page 35: Setup Menu Description
SETUP MENU DESCRIPTION General parameters-Language SETUP-General parameters-Language You can change the interface language. „ Press the icon to access the setup menu. Setup Language SETUP Italiano General parameters English Widgets Deutsch Conditions Español Consumption „ Select the desired language by pressing the relative icon, then confirm the selection. -
Page 36: General Parameters-Set Date And Time
General parameters-Set date and time General parameters-Volume control SETUP-General parameters-Set date and time SETUP-General parameters-Volume control The menu allows you to manage and control the audio volumes This function allows you to set the time and date of the device. associated with the various functions of the device. -
Page 37: General Parameters-Soft Touch Keys
SETUP-Widgets SETUP-Widgets The menu allows you to select which widgets are to be shown on the VIDEO DOOR ENTRY SETUP HOME page. Melody 1 Melody 2 Melody 3 SETUP Melody 4 Meter 1 Thermo 1 Alarm „ Press the name of the melody hear a preview. „... -
Page 38: Setup-Conditions
SETUP-Conditions Consumption-Toolbar SETUP-Conditions SETUP-Consumption-Toolbar activate/deactivate certain previously programmed You can select which meter to display - choosing from those available conditions. - in the FAVOURITES BAR toolbar of the device. See "FAVOURITES" on page 7. CONDITION SETUP S 41-6 CONSUMPTIONS Sup 41-7 Meter 1 Sup 41-8... -
Page 39: Consumption-Kco2
Consumption-Display „ Swipe your finger up or down to view all the available menu options. SETUP-Consumption-Display „ Select/deselect the desired option by pressing the corresponding You can choose which of the available meters to display. box. „ Option DESELECTED CONSUMPTION Meter 1 „... - Page 40 „ Set the desired unit price. „ Set the desired unit price. • EXAMPLE: set the cost of 1 kWh to a value of 53.10 cents € per unit. • EXAMPLE: set the cost of 1 kWh to a value of 53.10 cents € per unit. •...
-
Page 41: Consumption-Limits
Consumption-Limits Consumption-Settings SETUP-Consumption-Limits SETUP-Consumption-Settings You can set the maximum consumption limits by Hour / Day / This function allows you to change certain characteristics of the Month / Year in order to obtain an immediate visual indication in the meters installed. consumption graph and table if the set limit for the period is exceeded. -
Page 42: Settings-Pulses
Settings-Pulses SETUP - Anti-intrusion SETUP-Consumption-Settings-Pulses SETUP-Anti-intrusion √ EXAMPLE the pulse counter measures 1 mc every 10 pulses; set „ Enter the alarm password to access the area. the PULSES and INCREMENT values to respectively 10 and 1. ALARM SETUP Change PIN Voice menu Installer Timer... -
Page 43: Scenario Activation
Scenario activation „ Press the scenario you wish to activate. SCENARIO room 1 SCENARIO room 2 Scenario 1 Activate scenario? room 3 room 4 1. ENTIRE ROOM selection icon „ Confirm the selection. 2. List of associable functions available 3. Functions advanced info column Creating new scenarios 4. -
Page 44: Delay A Scenario
Advanced scenario functions » A confirmation screen opens. SCENARIO SCENARIO Confirm exit from Irrigation scenario creation? Auton Video System three Alarm four SCENARIO „ Long press on a scenario to open the advanced functions menu. Can now save Irrigation the scenario Auton Video System Rename... -
Page 45: Move A Scenario
Move a scenario Favourites page „ Press the icon to move the scenario (from the position in „ Press the icon to add the scenario to the favourites. which it appears in the list of available scenarios). SCENARIO SCENARIO Position TERMO 29 INVERNO Do you want to add the element to your bookmarks? -
Page 46: Conditioned Scenarios
Conditioned scenarios Advanced conditioned scenario functions SETUP-Scenarios-Conditioned „ See "Advanced scenario functions" on page 44 • The option "Favourites page" is replaced by the option "Conditions", which allows you modify the conditions associated SCENARIO with individual conditioned scenarios. Conditioned 1 Conditioned 2 SETUP-Key SETUP-Key... -
Page 47: Advanced Key Functions
Advanced key functions Modify a key SETUP-Key SETUP-Key-Advanced functions-Modify „ Press the icon to modify the scenarios associated with Key 1 the selected key. Key 2 • 2 scenarios may be selected: one IN and one OUT. • Only IMMEDIATE scenarios can be selected! Key 3 Key 4 „... -
Page 48: Delete A Key
Delete a key SETUP - Audio broadcast SETUP-Key-Advanced functions-Delete From this menu you can manage the operating parameters of the audio broadcast function. „ Press the icon to delete a previously registered key. • For configuration of the media server, refer to the technical documentation available online at the address http://wiki.slimdevices.com/index.php/Logitech_Media_Server •... -
Page 49: Port
Port SETUP - Protection SETUP-Audio broadcast-Port From this menu you can manage the system passwords and security parameters. „ Enter the port of the desired audio broadcast server, then confirm. PROTECTION 9000 User password Advanced password Home automation limits „ Press the desired option to open the relative menu. User password SETUP-Protection-User password •... -
Page 50: Home Automation Limits
KEY SETUP „ Press on the desired recipient to enter or edit the address. Key 1 Key 2 indirizzo@comelit.it Key 3 „ Swipe your finger up or down to view all the available menu options. „ To access the desired sub-menu, press the corresponding icon. -
Page 51: Total Reset
Total reset Create backup SETUP-ADVANCED-Total reset SETUP-ADVANCED-Import/Export-Create backup This function deletes all user, door entry monitor, home automation This function allows you to create a complete system backup and to and alarm system settings, plus calibration settings, restoring the save it on an SD card. default settings of the product. -
Page 52: Import Scenarios
Import scenarios Update product SETUP-ADVANCED-Import/Export-Import scenarios SETUP-ADVANCED-Update product This function allows you to import previously saved immediate, This function allows you to update the product firmware from an SD scheduled and conditioned home automation scenarios. card. √ Before proceeding with the update, you must insert an SD card containing at least one set of updated firmware. -
Page 53: Setup - Home Automation
SETUP - Home automation SETUP-ADVANCED-Home automation The section allows you to manage the home automation system parameters. HOME AUTOMATION Reset configurations Transmission time No. of transmissions Polling time „ To access the desired functions, press the corresponding icon. Home automation - Reset configurations SETUP-ADVANCED-Home automation-Reset configurations This function allows you to reset the home automation configuration previously loaded on the system. -
Page 54: Door Entry Monitors
Door entry monitors SETUP-ADVANCED-Door entry monitors The section allows you to manage the parameters of the door entry monitor system. 00000001 VIDEO SYSTEM Addresses Actuator directory Cameras directory Intercom Directory „ Enter the desired value, then confirm. Door entry monitors - Actuators directory „... -
Page 55: Door Entry Monitors - Cameras Directory
Door entry monitors - Cameras directory • CONFIGURE NAME allows you to enter or edit the name of the device to be entered in SETUP-ADVANCED-Door entry monitors-Cameras directory the list. This function allows you manage a directory of the cameras connected to ViP systems or via RTSP protocol. -
Page 56: Door Entry Monitors - Intercoms Directory
Door entry monitors - Intercoms directory „ Press the icon (1) to move to the next mode. ViP > RTSP SETUP-ADVANCED-Door entry monitors-Intercoms directory RTSP > ViP This function allows you to add and manage the intercoms connected √ RTSP MODE to the ViP system. -
Page 57: Door Entry Monitors - Set Tone Repetition
Door entry monitors - Set tone repetition Door entry monitors - Call divert SETUP-ADVANCED-Door entry monitors-Call divert SETUP-ADVANCED-Door entry monitors-Set tone repetition This function allows you to set the number times the tone is repeated From this menu you can set and manage call diversion to another ViP for each of the applicable events. -
Page 58: Door Entry Monitors - Alarms
Door entry monitors - Alarms Door entry monitors- Doors directory SETUP-ADVANCED-Door entry monitors-Alarms SETUP-ADVANCED-Door entry monitors-Doors directory From this menu you can set and manage a series of previously This function allows you to add and manage electronic locks (doors) programmed emergency/alarm calls to a control panel. -
Page 59: Door Entry Monitors - Hands-Free
Door entry monitors - Hands-free SETUP-ADVANCED-Door entry monitors-Hands-free The function - when active - automatically opens audio on receipt of a call from an external unit. „ Press the icon to activate the function. » The icon changes status. Door entry monitors - Always record SETUP-ADVANCED-Door entry monitors-Always record When activated, the function automatically starts audio/video recording on receipt of a call from an external unit.
Need help?
Do you have a question about the Icona ViP and is the answer not in the manual?
Questions and answers