Changing The Engine Oil - Toro TimeCutter SW 4200 Operator's Manual

A
C
F
H

Changing the Engine Oil

Service Interval: After the first 5 hours/After the first
month (whichever comes first)—Change
the engine oil.
Every 100 hours/Yearly (whichever comes
first)—Change the engine oil (more often in dusty,
dirty conditions).
Note: Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil drains
completely.
2. Disengage the PTO and ensure the parking brake is
engaged.
3. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
B
D
E
G
I J
Figure 36
A
C
G027475
E
G
36
g027799
B
D
F
g028316
Figure 37