1. Manuals
  2. Brands
  3. Eaglemaster Manuals
  4. Car Alarm
  5. E8
  6. User manual

Eaglemaster E8 User Manual

Two way remote engine start car alarm
Hide thumbs
Table of Contents

Advertisement

Quick Links

2 - WAY C A R A L A R M S Y S T E M
W I T H R E M O T E E N G I N E S TA R T
MODEL
IMPORTANT:
Please read the entire manual for complete details on the features, accessories and
operation before attempting to use your security system.
This Security system must be installed by a qualified technician to ensure proper
operation. Do not attempt to install or modify this system yourself as
this way void your warranty.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E8 and is the answer not in the manual?

Questions and answers

Related Manuals for Eaglemaster E8

Summary of Contents for Eaglemaster E8

  • Page 1 2 - WAY C A R A L A R M S Y S T E M W I T H R E M O T E E N G I N E S TA R T MODEL IMPORTANT: Please read the entire manual for complete details on the features, accessories and operation before attempting to use your security system.

  • Page 2: About Your System

    About Your System Congratulations on your purchase of this state-of-the-art vehicle security system. With proper installation this system will provide superior protection and performance for many years to come. What is included: A control module Tranceiver module One 5-button 2-way LCD remote transmitter One 4-button random code remote transmitter Dual stage shock sensor High output 6-tone siren (optional)
  • Page 3 Functions of remote transmitters The remote transmitters integrated with the security system use the most perfect and reliable radio frequency transfer as opposed to all car security systems being sold at the moment. Some of modern skilled car hijackers use the devices known as code grabbers allowing to accept and keep a signal transferred by the remote control of the car security system.

  • Page 4: Standard Lcd 2-Way Icon Instructions

    Standard LCD 2-way icon instructions Remote transmitting a signal. Check-in range turn ON status. 2way battery level indication. System Disarmed. System Armed. Silent Armed. Passive arming & Zone1 Zone1 Auto re-arming mode. 1st-stage sensor bypass. 2nd-stage sensor bypass. Zone2 Zone2 1st-stage sensor bypass.
  • Page 5 Hood open when armed. Door open when armed. Trunk open when armed. Zone1 Zone1 Zone2 2nd stage sensor triggered. 1st stage sensor triggered. 1st stage sensor triggered. Zone2 1st stage sensor triggered. Door switch triggered. Trunk switch triggered. Hood switch triggered. Ignition switch triggered.
  • Page 6 Safety mode/ Safe status Anti car-jacking mode. Valet mode. Remote engine running mode. Fix time engine start mode. Clock time engine start mode. Temperature engine start mode. Call / page mode. Turbo mode. Remote button lock Battery conservemode. Vibrate mode.
  • Page 7 Remote Function Table: Functions Step Condition Arm and door lock Press once Disarmed & ACC off Arm without siren chirp Press over 2sec. until 1 beep given. Disarmed & ACC off Zone1- 1st-stage bypass Press once within 5sec. of arming. Arming within 5sec.
  • Page 8 Remote Function Table: Functions Step Condition Trunk open / CH-1 active Press over 2sec. until 1 beep given Prolong engine running time Press once, after LCD indicate 3min left. Engine running mode Enable check-in range Press once within 5sec. of arming. Arming within 5sec.
  • Page 9 Functions Step Condition Remote button lock (on/off) Press over 2sec. until 1 beep given. Vibrate mode on/off Press over 2sec. until 1 beep given. Clock time adjust mode Press over 2sec. until 1 beep given. Clock time engine start Press over 4sec.
  • Page 10 Programming of codes for new transmitters Important Please notice that during the programming of a new transmitter into the system memory all previous programmed codes of the transmitters will be erased so in case of programming for additional transmitters the available transmitters shall be programmed again. The system supports in memory up to four codes of remotes irrespective of the fact if the codes of four different remotes or the same code four times is recorded into the system.

  • Page 11: Programming 2-Way Remote

    Programming 2-Way remote Battery conserve mode The mode can be turned on/off 2-way receiving in the Disarmed mode if you simultaneously press down the buttons until the zzz icon turn on. Being in the Disarmed mode the remote pager turns off its receiver in 30sec. To exit the mode, simply press the buttons until zzzz icon turn off.

  • Page 12: Check-In Range Notification (On/Off )

    Check-in range notification (on/off ) Arming the system within 2 seconds, press button once on the 2way remote , the system will enable this Check- in range function. This Icon will turn on and give 1 beep The 2way remote sound to indicate the function has been will respond: turned ON.

  • Page 13: Way Signal Paging Features

    Vehicle status checking The 2-Way remote offer the feature to check the current status of the car, simply press the button once within proper operation range. The main unit will send the signals to the 2-Way remote about the vehicle current status. Turn on LCD display back light Simply press button once, the back light of LCD display will turn on 5 seconds and...
  • Page 14 Alarm Page table Display Beeps Vibrations Trigger Zone 1 5 short 1st stage-Sensor warning 1 times Zone 1 Melody 1 2nd stage-Sensor triggering 1 times periodically Zone2 5 short 1st stage-Sensor warning 1 times Zone 2 Melody 1 1 times periodically 2nd stage-Sensor triggering Melody 2 Trunk switch triggering...

  • Page 15: Standard Features

    Standard features - To ARM the system: Press the button once. To arm your system within proper operation range, simply press button once (while system in disarmed or Acc off position) . The system will respond one siren chirp, one lights flash, doors lock, disable engine starter, the status LED will flash approximately once per second, indicating that the system is actively protecting your vehicle.

  • Page 16: Passive Arming

    Passive arming: (Table-1 of No.2 ON status) If set programme mode to "ON", while turn Ignition OFF, then close the last door , the LED will starts flashing and Siren will give 2 chirps and Lights flash twice to indicated that the system is in passive arming mode.

  • Page 17: Alarm Cycle

    - Alarm cycle : If a violation occurs the system will respond by sounding the siren and flashing the lights for approximately 30sec. before the system resets itself and continues to protect your car. If violation still occurs the system, siren and lights will working for 4 or 5 cycles then the system reset itself and continues to protect other zones.

  • Page 18: Disarming Without A Transmitter

    Disarming without a transmitter : (table-1 of No.6 Valet sw status) The security system can be disarmed without the remote transmitter. The function is provided for the case when you need to disarm the system and drive the car but the Remote transmitter is faulty or lost.

  • Page 19: Car Search Mode

    - Panic (turning on/off) : Press the button over 2sec. The system will be immediately armed , and siren turned on and the parking lights will start flashing for 30 seconds. To turn off the panic mode, press any button once of the remote . If you do not turn off the panic mode the system will be automatically turned off in 30sec.

  • Page 20: Way Lcd Intrusion Alert

    - Intrusion Alert by status LED : Upon disarming the system, if the vehicle is attempted or intruded, siren and lights will Indicates 5 chirps and 5 flashes to identify which zone was triggered. LED mode indicates the following different triggering. flash 2 times after a pause Sensor 1st-stage triggered flash 3 times after a pause...

  • Page 21: Dual Stage Shock Sensor

    - Dual stage shock sensor: This device only activates after 5 seconds of arming state; this is preventing from the weak impact caused by the driver while leaving the car. -Light impact will activate the 1st stage sensor by giving 3 short warning chirps. 2-way remote will respond 5 beeps and flashing icon as under.

  • Page 22: Valet Mode

    - Remote Zone2 sensor bypass: Press the button within 5sec. of amring. This system offer 2 stage sensors bypass feature . Within 5sec. after set arming, to press button once , the system will give 2 short chirps , the 1st stage bypassed. Press button Once again, within 5sec.
  • Page 23 Manage Engine start /running features - Safe status : This system has several important safety input to ensure proper operation of the motor and prevent accidental damage to the engine or its components. If one of the under list input is defective , the engine will not allow to start. - The hood switch is opened.

  • Page 24: To Remote Start The Vehicle

    To remote start the vehicle: 1. Armed position, press the button for over 2sec. Then within 2sec. Press the button Once. 2. The parking lights will flash 3 times to confirm that the vehicle will attempt to start. 3. Once the vehicle has started, it will run for the pre-programmed period of time (either 10, 20,30 minutes or unlimited - see Table-3 of NO.1 section ) or until a shutdown input is triggered.
  • Page 25 - Fix time engine start : Press the button once. This feature will automatically engine start for every (2/3/4/24 hour) check programme Table-3 of NO.2. This makes it possible to warm up the engine (Table-3 of NO.1 ), as well as the system is in Safe status.
  • Page 26 - Clock time engine start: Press the button over 2sec. for twice time. This feature will engine start by pre-setting clock time. This makes it possible to warm up the engine (Table-3 of NO.1 ), as well as the system is in Safe status. To set clock time engine start the vehicle: 1.

  • Page 27: Anti-Hi-Jack Mode

    Anti-Hi-Jack mode This feature will protect your vehicle in the event that there is an attempt to Hi-jack the vehicle. The system allows using three independent or simultaneous options to turn on the function Anti-Hi-Jack. If the system turned on Anti-hI-Jack mode, the parking lights will flash 1 time and the LED will start flashing fast indicate that the mode is turned on.
  • Page 28 - Anti car-jack mode table: If enter anti car-jack mode, the Parking lights will flashing once and the LED will fast flashing to show the system is enter anti car-jack mode. While proceed at 60sec. main unit sends signal to the 2-Way remote a 2-way LCD display : The AHJ icon will turn on after 60sec.
  • Page 29 Additional service functions to control the system - Remote controlled additional channel (CH-1) The system has the channel CH-1 to control various additional devices connected to the This channel "Gray wire" is a negative pulsed output. system. The channel can be used for : (Table-2 of NO.5) - Remote trunk open .
  • Page 30 Control of the CH-2 (Disarming output for 30sec.) If programmed , the channel will constant output 30sec. when disarming. This feature for the car with dome-light supervision. Control of the CH-2 (Remote latched) Press the button over 2sec. Simply press and hold button 1+4 over 2 seconds, the channel will constant output . To exit by press and hold button 1+4 over 2 seconds, the channel will deactivated.
  • Page 31 Control of the CH-4 (2nd stage door unlock) If you select this function the stage-by-stage unlocking of driver's then passengers' doors one after another is automatically carried out with the remote transmitter if you sequentially press the disarming button. Control of unlocking of the passengers doors by the signal of one of additional channels (CH4 ) to be programmed respectively.
  • Page 32 - Additional (alarm) call if alarm call button located on the antenna module of the transceiver is pressed - The system has an additional channel to transfer the signal to call for/notify the owner of the two-way communication remote. The call can be made by the second person being in the car and enabling the call button on the module of the antenna pager.

  • Page 33: Entering The Programming Mode

    7. If PIN code correct insert , the siren will give 1 long chirp to acknowledging that the system is ready for programming of new PIN code, see next step #9. If PIN code incorrect insert, the system will exit the mode by given 2-long chirp. <<...

  • Page 34: Programme Table

    PROGRAMME TABLE-1 Press the Press button Press button Press button Press button Valet SW to next item PROGRAMME FEATURES Item NO. by 1-chirp 2-chirp 3-chirp 4-chirp LED flash IGN on10sec Foot brake IGN on10sec Foot brake & Ignition control Lock/ Lock / Lock/ No.1...
  • Page 35 PROGRAMME TABLE-2 Press the Press button Press button Press button Press button Valet SW to next item PROGRAMME Item NO. by FEATURES LED flash 1-chirp 2-chirp 3-chirp 4-chirp Lock- Lock- 0.8sec. 30sec. No.1 Manage door lock/unlock sec. sec. Unlock- Unlock- 2pulse 0.8sec.
  • Page 36 PROGRAMME TABLE-3 Factory settings Press the Press button Press button Press button Press button Valet SW PROGRAMME to next item FEATURES Item NO. by 1-chirp 2-chirp 3-chirp 4-chirp LED flash Unlimited minutes minutes minutes Engine run time after start No.1 Time start engine by each No.2 hour...

  • Page 37: System Installation

    System Installation: 1. Thoroughly read and become familiar with the installation instructions before beginning the installation. 2. Review system contents: (1). A control module. (2).2-way pager transceiver antenna (3). One 5-button 2-way LCD remote transmitter. (4).One 3-button random code remote transmitter (5).Dual stage shock sensor (6).High output 6-tone siren (optional) (7).Harness: .

  • Page 38: Wiring Diagram

    WIRING DIAGRAM : Antenna ZONE1 Extend the whole wire, align it with the intersection Plug-in dual stage of dashboard and the front window glass. shock sensor Keep it away from the metal at least 5 cm to have the best receiving condition. indicator ZONE2 indicator...
  • Page 39 20-PIN CON2 main connector wiring (-) CH-6 Connect to Chassis (-) 300mA negative Ground (-) pulsed when disarmed output Yellow Black (killer2) (-) Safety switch (-) negative input Connect to (-) Pink Connect to the Red/black negative Hood Park switch gear in pin switch the vehicle.
  • Page 40 6-PIN CON1 Connector for Engine start wiring Green Black/yellow Starter ON output (+) ACC ON output (+) ACC (+) output (prog.) Yellow/black blue (acc circuit , air-con & Starter input (+) heater..) check Table-3 of No.6 Positive power Yellow IGN1 output(+) (+) 12VDC input the wire will active when remote start...
  • Page 41 CON1 engine start wire connection guide: The six heavy gauge wires coming from the large connector are used to energize high current circuits in the vehicle. It is crucial that these connections are well-made and capable of handling the current demands. Black/yellow (+) starter output Connect this wire to the starter wire in the vehicle.
  • Page 42 Yellow/black (-) factory disarm output This wire sends a negative pulse every time the remote start is activated. This can be used to pulse the disarm wire of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+) pulse to the disarm wire as shown in the diagrams below.
  • Page 43 Green/White (+) Foot brake input This wire MUST be connected to the vehicle's brake light wire. This is the wire that shows (+) 12V when the brake pedal is depressed. The remote start or turbo mode will be disabled or shut down any time the brake pedal is depressed.
  • Page 44 6-PIN Connector for Central Door Locking Wiring 1.) For Factory installed central door lock system MOTOR CONTROL MOTOR CONTROL ORIGINAL DOWN BUILT-IN DOOR MOTOR LOCK CONTROLLER (Inside of the front door) MAIN LINE Central door lock wiring Green/black Green Green/red Blue/black Blue Blue/red...
  • Page 45 Made in Taiwan...

Table of Contents

Save PDF