Table of Contents
Advertisement
2-WAY CAR AL ARM SYSTEM
Instruction manual
IMPORTANT:
Please read the entire manual for complete details on the features, accessories and
operation before attempting to use your security system.
This Security system must be installed by a qualified technician to ensure proper
operation. Do not attempt to install or modify this system yourself as
this way void your warranty.
Advertisement
Table of Contents
Related Manuals for Eaglemaster E5
Summary of Contents for Eaglemaster E5
- Page 1 2-WAY CAR AL ARM SYSTEM Instruction manual IMPORTANT: Please read the entire manual for complete details on the features, accessories and operation before attempting to use your security system. This Security system must be installed by a qualified technician to ensure proper operation.
-
Page 2: Table Of Contents
Table of contents Page About your system System maintenance Remote battery replacement 2-1. LCD 2-way configuration 1-way remote description 2-way & 1-way remote function table Standard LCD 2-way icon instructions Programming 2-way remote Disable remote receiving 7-1. Remote button 1.2.3 on/off 7-2. - Page 3 9-23. 2nd step disarm 9-24. Remote trunk open 9-25. CH-5: Dome light supervision 9-26. CH-5: Arm W/Engine running 9-27. CH-5: Turbo mode 9-28. CH-6: Programmable output 9-29. CH-7: Programmable output Red/black programme (+) input 9-30. - Reverse warning 9-31. - Heard light warning 9-32.
-
Page 4: About Your System
About Your System Congratulations on your purchase of this state-of-the-art vehicle security system. With proper installation this system will provide superior protection and performance for many years to come. What is included: A control module 2-way pager transceiver antenna One 5-button 2-way LCD remote transmitter One 3-button or 4-button random code remote transmitter Dual stage shock sensor High output 6-tone siren (optional) -
Page 5: System Maintenance
System maintenance The system requires no specific maintenance other than battery replacement for the remotes. LCD 2-Way Remote Battery Replacement The 2-way remote is powered by a 1.5V AAA battery. The Battery Level indicator has three level indicators that serve as a visual indication of battery charge. When the battery reaches a low charge level that requires replacement, the transceiver will generate a single notification chirp, and the Battery Level indicator will flash continuously. -
Page 6: Way Remote Description
1-Way Remote Transmitter Description (optional 3 & 4 button available) LED indicator Button 1 (Arm / Door lock) Button 2 (Disarm / Door unlock) Button 3 (Trunk open) Button 4 (Silent arm mode) TX-4R 2-way & 1-way Remote Function Table: Functions Step Condition... -
Page 7: Standard Lcd 2-Way Icon Instructions
Standard LCD 2-way icon instructions Remote transmitting a signal. Check-in range turn ON status. Weak signal notification. System Disarmed. Silent Armed. System Armed. Passive arming & Auto re-arming mode. 1st-stage sensor bypass. 2nd-stage sensor bypass. PASS PASS Panic mode. Door open when armed. Trunk open when armed. - Page 8 Hood open when armed. 1st stage sensor triggered. 2nd stage sensor triggered. Door switch triggered. Trunk switch triggered. Hood switch triggered. Ignition switch triggered. Passive immobilizer mode. Anti car-jacking mode. IMMO Valet mode. Arm W/engine running mode. Turbo mode.
- Page 9 Call / page mode. 2way receiving OFF mode. 2way button OFF mode. CALL Alarm clock. 2way Vibration mode. 2way time display. Extra sensor triggered. Hand brake indication. 2way battery level indication. (Knock sensor) optional (Optional for starter model) BRAK E...
-
Page 10: Programming 2-Way Remote
Programming 2-way remote Disable remote receiving You may turn off the 2-Way remote receiving signal from the main unit. Press button simultaneously for 2sec. until one long beep is heard. Remote receiving is now disabled. To turn on receiving again, Press button simultaneously until two long beep is heard, remote receiving is now enable. -
Page 11: Time Adjust Mode
Time adjust mode Besides operating for alarm functions, LCD remote control additionally provides 12-hour clock, alarm clock. Instructions: 1. Press and hold Button for 3sec. to enter time-setup mode, 1 beep will be heard. 2. Press button to select Hour & Min adjust setting. Icon flashing to indicate. AM/PM indicator 12-hour display Minutes display... -
Page 12: Way Signal Paging Features
2-way signal paging features A page is the signal the control module sends to the remote controls confirmation of receipt of a command or alarm system status. When the remote control receives a page it will generate a page notification to the user (notifications are audible beeps) and the LCD Icons will display the current system status. -
Page 13: Check-In Range Notification (On/Off )
Check-in range notification (on/off ) Arming the system within 8-seconds, press button once on the 2way remote , the system will enable this Check- in range function. Icon will on for 2sec. and give 1 beep The 2way remote sound to indicate the function has been will respond: turned ON. -
Page 14: Standard Features
STANDARD FEATURES: To ARM the system: To arm your system within proper operation range, simply press button once (while system in disarmed or Acc off position) . The system will respond one siren chirp, one lights flash, doors lock, disable engine starter, LED will begin flashing quickly until all sensor inputs are active - LED will start blinking slowly (flash once per second) to indicate the system is in full armed. -
Page 15: To Disarm The System
- To DISARM the system : To disarm your system within proper operating range, simply press button once (while system in arm position). The system will respond two siren chirp, two light flash, doors unlock, Enable your engine starter, LED off. + Two beep sound 2-way LCD display : - Intrusion Alert:... -
Page 16: Disarm Without Siren Chirp
- Disarm without siren chirp : To disarm your system without siren chirp , simply press button once then within 3sec. press button once. Note: this features is only activated under the system is in armed position,. - Silent arm mode : The system provide a feature to turn OFF the siren, simply press 2-way button of press 1-way button... -
Page 17: Panic Mode
- Panic mode: If you are threatened in or near your vehicle, you can attract attention by press button for 2sec. system will triggering for 30sec. To stop Panic mode at any time, simply press any button once. Note: if Panic mode activate in disarmed position, the 2-way remote will respond melody sound and LCD indicates flashing icons as under: Under Panic mode, the 2-way remote 2-way LCD display :... -
Page 18: Car Search Mode
- Car search mode: The system provide a feature to easy find your car position, simply press button once when in armed after 8sec. The system will respond by 5 chirps and 5 lights flash. -Comfort /window close : This channel "White/black wire" is a negative (-500mA) output features, this feature can be controlled "... -
Page 19: Passive Immobilizer (Programmable)
- Passive immobilizer (programmable): If programmed with this function, when turn off ignition switch for 30 seconds or you open and close the door, it will disable the engine starter right way . The LED will flash twice per second. IMMO 2-way LCD display : + One beep sound... -
Page 20: Remote Trunk Open
- Remote trunk open: Simply press and hold button over 2 seconds, the channel will output for 1 second pulse , to open the trunk. When armed if remote trunk open or close, the system will give one light flash and the 2-way remote will give one beep sound. The 2-way LCD display icon as under: Note: (1) Ignition ON does not allow to remote trunk open, unless one door is opened. -
Page 21: Ch-5: Turbo Mode
Turbo mode: If programmed , the CH-5 channel will constant output when ignition turn on 1 minutes. It will keeps the engine running after arriving at your destination by ignition off for a programmed time 1/ 3/ 5/ 10 minutes. This allows the system's timer to conveniently cool down the turbo after you have left the vehicle. -
Page 22: Siren Chirps On/Off (Programmable)
- Siren chirps ON/OFF (programmable): This programme feature controls the chirps that confirm the arming , disarming and intrusion alert of the system. Note: Set siren chirp off, if door, hood or trunk not closed, siren will activated. - Status LED timer: If the alarm system armed after 24 hours, the LED will blink shortly once per second. -
Page 23: Anti Car-Jacking Mode
Anti Car-Jacking mode: This feature will protect your vehicle in the event that there is an attempt to Hi-jack the vehicle. The system provide two ways to activate the Anti car-jacking mode if programmed. While system is trigger anti-car jack mode, lights will flash once and the LED will fast flashing to show the system is enter anti-car jacking mode. -
Page 24: Antenna Call Switch
R.F Antenna CALL SWITCH : The R.F antenna module provide a switch which can be send a signal to the 2-way remote. In disarmed or ACC on position, if press Call switch for 2 seconds, lights will flashing 5 times and the 2-way remote will give pre-warn beep sound . -
Page 25: Transmitter Programming
Transmitter programming: This programming features is provide the owner to learn the new transmitter into the system memory. This system can expand 4 different transmitters, and comes from factory with two transmitters already programmed into the system memory (1-way & 2-way ) . Whenever you want to add or delete transmitter code , the procedures are as following: Enter Valet mode, the LED on status. -
Page 26: Programme Mode Table
PROGRAMME FEATURES TABLE: Press once Press twice Press Press 3 times Press 4 times FEATURES Item NO: 2-chirp 3-chirp 1-chirp 4-chirp LED flash Ignition controlled doors lock *W/I Ignition controlled doors unlock *W/I Automatic re-arm *W/O Siren & Horn pulse output *Siren Horn Arm / Disarm siren chirp on/off... - Page 27 Press once Press twice Press Press 3 times Press 4 times FEATURES Item NO: 2-chirp 3-chirp 1-chirp 4-chirp LED flash 1-way Reminder disarm status to 2-way *W/I *Arm With (Dome light/Engine run/Turbo mode) CH-5 Dome light Turbo mode Engine running Turbo mode time setting *1 minute 3 minute...
-
Page 28: System Installation
System Installation: 1. Thoroughly read and become familiar with the installation instructions before beginning the installation. 2. Review system contents: (1). A control module. (2).2-way pager transceiver antenna (3). One 5-button 2-way LCD remote transmitter. (4).One 3-button or 4-button random code remote transmitter (5).Dual stage shock sensor (6).High output 6-tone siren (optional ) (7).Status LED indicator (8).Valet over-ride switch... -
Page 29: Wiring Diagram
WIRING DIAGRAM Dual color LED Plug-in dual color LED indicator R.F Antenna Antenna Extend the whole wire, align it with the intersection of dashboard 20 PIN and the front window glass. MAIN PORT Keep it away from the metal at 6 PIN DOOR least 5 centimeter to have the best receiving condition. - Page 30 20 PIN MAIN PORT WIRING DIAGRAM Cutting the vehicle's starter wire will leave two sides- the ignition switch side and the starter solenoid Connect to Chassis side. Black(-) Ground (-) ENG / Starter (-) Green Connect to (-) BLOCKING Negative Door Pin Switch 15Amp Connect (+) 12V...
-
Page 31: Central Door Lock Wiring
Central door lock wiring: 1.) For Factory installed central door lock system MOTOR CONTROL MOTOR CONTROL ORIGINAL DOWN BUILT-IN DOOR MOTOR LOCK CONTROLLER (Inside of the front door) MAIN LINE Central door lock wiring Green/black Green Green/red Blue/black Blue Blue/red 2.) Directly connect to 2 wire Actuator + 12V 2 WIRE ACTUATOR...
Need help?
Do you have a question about the E5 and is the answer not in the manual?
Questions and answers