Safe Operating Procedures - Bosch GLM 80 Operating And Safety Instructions Manual

yourself, not even from a large
distance.
Do not use the laser viewing
glasses as safety goggles. The
laser viewing glasses are used for
improved visualization of the laser
beam, but they do not protect
WARNING: Be sure to read and
understand all instructions in this
manual before using this product.
Failure to follow all instructions
may result in hazardous radiation
exposure, electric shock, fire,
and/or bodily injury.
CAUTION: Use of controls or
adjustments or performance of
procedures other
specified in this manual, may result
in hazardous radiation exposure.
CAUTION: The use of optical
instruments with this product will
increase eye hazard.
IMPORTANT: The following labels
are on your measuring tool for
your convenience and safety. They
indicate where the laser light is
emitted by the level. ALWAYS BE
AWARE of their location when
using the level.
ALWAYS: Make sure that any
bystanders in the vicinity of use
are made aware of the dangers of
looking directly
measuring tool.
DO NOT remove or deface any
warning or caution labels.

Safe Operating Procedures

than those
into
against laser radiation.
Do not use the laser viewing
glasses as sun glasses or in
traffic. The laser viewing glasses
do not
protection
perception.
Removing labels increases the risk
of exposure to laser radiation.
DO NOT stare directly at the laser
beam or project the laser beam
directly into the eyes of others.
Serious eye injury could result.
DO NOT place the measuring tool
in a position that may cause
anyone to stare into the laser
beam
unintentionally. Serous eye injury
could result.
DO NOT use any optical tools
such as, but not limited to,
telescopes or transits to view the
laser beam. Serious eye injury
could result.
DO NOT operate the measuring
tool around children or allow
children to operate the measuring
tool. Serious eye injury could
result.
ALWAYS turn the measuring tool
"OFF" when not in use. Leaving
the measuring tool "ON" increases
the
the risk of someone inadvertently
staring into the laser beam.
DO NOT operate the measuring
tool in combustible areas such as
-8-
afford complete
and reduce
intentionally
UV
color
or