Siemens easyTek User Manual page 20

Pairing standard Bluetooth devices:
Press
flashes
easyTek searches for devices nearby.
Set up your Bluetooth device to search for other
Bluetooth devices. Refer to the device's manual.
On the Bluetooth device, select "easyTek" from the list
of detected devices.
If requested, enter the PIN "0000".
Pairing may take several seconds.
The blue LED indicates the pairing status:
Pairing status for standard Bluetooth devices
flashing, then on for 5 seconds, then off
➧
Pairing has been completed successfully.
You can now use the Bluetooth device.
flashing, then off
➧
Pairing was not successful. In this case, ensure that the
Bluetooth device is within operating distance and try again.
20
and simultaneously until the blue LED
. This takes approximately 5 seconds.