Related Manuals for Falcon Professional+100 FX Dual Fuel
Summary of Contents for Falcon Professional+100 FX Dual Fuel
- Page 1 USER GUIDE & INSTALLATION INSTRUCTIONS Professional 100 FX Dual Fuel Australia U110400-01...
-
Page 3: Table Of Contents
Contents 1. Before You Start... Troubleshooting Important! Installation Installation and Maintenance Service and Spares Peculiar Smells Dear Installer If you smell gas Provision of Ventilation Ventilation Location of Cooker Personal Safety Conversion Cooker Care Positioning the Cooker Cleaning Moving the Cooker Cooker Overview Completing the Move Hotplate Burners... -
Page 5: Before You Start
1. Before You Start... Ventilation Your cooker should give you many years of trouble-free cooking if installed and operated correctly. It is important The use of a gas cooking appliance results in the production that you read this section before you start, particularly if you of heat and moisture in the room in which it is installed. -
Page 6: Cooker Care
DO NOT use harsh abrasive cleaners or sharp metal DO NOT use water on grease fires and never pick scrapers to clean the oven door glass since they can up a flaming pan. Turn the controls off and then scratch the surface, which may result in shattering of smother a flaming pan on a surface unit by covering the glass. -
Page 7: Cooker Overview
2. Cooker Overview DocNo.020-0006 - Overview - 100DF - Prof+ Fig. 2.1 Professional + 100 FX ArtNo.270-0029 - Prof+ 90SC annotated The 100 dual fuel cooker (Fig. 2.1) has the following features: Fig. 2.2 ArtNo.270-0001 5 hotplate burners including a wok burner Proplus control to high A control panel incorporating a timer Main multifunction oven... -
Page 8: Wok Burner
The igniter should spark and light the gas. Keep holding the Fig. 2.3 knob pressed in to let the gas through to the burner for about ArtNo.270-0003 ten seconds. Proplus control to low If, when you let go of the control knob, the burner goes out, then the FSD has not been bypassed. -
Page 9: The Griddle
The Griddle Fig. 2.11 The griddle fits the left-hand pan support, front to back (Fig. 2.11). It is designed for cooking food on directly. DO NOT use pans of any kind on it. The griddle surface is non-stick and metal cooking utensils (e.g. spatulas) will damage the surface. Use heat resistant plastic or wooden utensils. -
Page 10: The Multifunction Ovens
The Multifunction Ovens Function Both ovens are multifunction ovens. In addition to the To thaw small items in the oven without Defrost element around the fan, it is fitted with extra heating heat elements, in the top of the oven and under the oven base. A full cooking function, even heat Fan oven Take care to avoid touching the top elements when placing... - Page 11 Fanned Grilling Base Heat This function operates the fan while the top element This function uses the base element only. It will crisp is on. It produces a more even, less fierce heat than a up your pizza or quiche base or finish off cooking the conventional grill.
-
Page 12: The Ovens
The Ovens Fig. 2.15 The clock must be set to the time of day before the left- hand oven will work. See the following section on ‘The Clock’ for instructions on setting the time of day. The ArtNo.270-0026 clock only controls the left-hand oven. Proplus MF oven controls (2) References to ‘left-hand’... - Page 13 To Stop the Multifunction Oven at a Specific ArtNo.301-0008 2BC Fig. 2.21 Time of Day Stopping the oven 2 You have set the required temperature and function mode for the Multifunction Oven and you would like the Multifunction Oven to automatically stop. TOP TIP Make a note of the current time so you do not forget.
- Page 14 To Start and Stop the Multifunction Oven Fig. 2.25 ArtNo.301-0010 2BC Setting the cooking time The Multifunction Oven allows you to automatically start and stop by a combination of the length of the cooking time and the stop time. Giving you the flexibility to cook casseroles etc while you are out.
-
Page 15: Accessories
Key Lock Art No. 301-0011 2BC Fig. 2.31 The Key Lock will activate and deactivate the Multifunction Activating the key lock 1 Oven. 1. Cancel any active programs. Refer to ‘Reset to Manual Cooking’ . 2. Turn the Timer (A) knob to the Clock (C) setting and hold for approx. -
Page 16: Storage
Storage Fig. 2.40 Fig. 2.41 The bottom drawer is for storing oven trays and other cooking utensils. It can get very warm, so do not store anything in it that may melt or catch fire. Never store flammable materials in the drawer. -
Page 17: Cooking Tips
3. Cooking Tips Cooking with a Multifunction Oven General Oven Tips Remember: not all modes are suitable for all food types. The The wire shelves should always be pushed firmly to the back oven cooking times given are intended for a guide only. of the oven. -
Page 18: Cooking Table
4. Cooking Table DocNo.031-0004 - Cooking table - electric & fan single cavity The oven control settings and cooking times given in the table below are intended to be used AS Top (T) A GUIDE ONLY. Individual tastes may require the temperature to be altered to provide a preferred ArtNo.050-0007 result. -
Page 19: Cleaning Your Cooker Essential Information
5. Cleaning Your Cooker Essential Information Fig. 5.1 Isolate the electricity supply before carrying out any thorough cleaning. Allow the cooker to cool. NEVER use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. DO NOT mix different cleaning products –... -
Page 20: Control Panel And Doors
Control Panel and Doors Fig. 5.5 Avoid using any abrasive cleaners including cream cleaners. For best results, use a liquid detergent. The same cleaner can be used on the doors, or alternatively, using a soft cloth wrung out in clean hot soapy water – but take care that no surplus water seeps into the appliance. -
Page 21: Removing The Right-Hand Oven Cover Plate And Reflector Tray
Removing the Right-hand Oven Shelf Supports Fig. 5.9 To clean the oven sides, slide out the shelves, unhook the shelf supports from the oven sides (Fig. 5.9), and lift out. Refit in reverse, making sure that the bottom of the shelf supports are inserted into the holes at the bottom of the oven (Fig. -
Page 22: Cleaning Table
Cleaning Table Cleaners listed (Table 5.1) are available from supermarkets or electrical retailers as stated. For enamelled surfaces use a cleaner that is approved for use on vitreous enamel. Regular cleaning is recommended. For easier cleaning, wipe up any spillages immediately. Hotplate Part Finish... -
Page 23: Troubleshooting
6. Troubleshooting Hotplate ignition or hotplate burners faulty If there is an installation problem and I don’t get my original installer to come back to fix it who pays? Is the power on? Is the clock illuminated? You do. Service organisations will charge for their call If not, there maybe something wrong with the power outs if they are correcting work carried out by your supply. - Page 24 The timed oven is not coming on when automatic cooking Fig. 6.1 Has the oven knob been left in the OFF position by mistake? Is the oven locked (see above)? ArtNo.324-0005 Oven light bulb Oven temperature getting hotter as the cooker gets older If turning the temperature down using the oven control knob has not worked, or has only worked for a short time, then you may need a new thermostat.
-
Page 25: Installation
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 7. Installation Service and Spares Firstly, please complete the appliance details below and keep them safe for future reference – this information will enable us to accurately identify the particular appliance and help us to help you. Filling this in now will save time and inconvenience if you later have a problem with the appliance. -
Page 26: Dear Installer
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Dear Installer Provision of Ventilation Before you start your installation, please complete the details This appliance is not connected to a combustion products below, so that, if your customer has a problem relating to evacuation device. - Page 27 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. You will need the following equipment to complete the Checking the Parts: cooker installation satisfactorily: 3 pan supports Griddle • Flexible gas hose. • Gas pressure tester/manometer. •...
-
Page 28: Positioning The Cooker
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Positioning the Cooker Fig. 7.1 The diagram (Fig. 7.1) shows the minimum recommended distance from the cooker to nearby surfaces as given in AS 5601. *Any splashback must be fitted in accordance with the manufacturers instructions. -
Page 29: Completing The Move
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Lowering the Two Rear Rollers Fig. 7.3 To adjust the height of the rear of the cooker, first fit a 13 mm spanner or socket wrench onto the hexagonal adjusting nut (Fig. -
Page 30: Gas Connection
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. between the bracket and the engagement slot in the rear of Fig. 7.8 the cooker. Fit the bracket so that it engages as far as possible over the chassis of the cooker. -
Page 31: Electrical Connection
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Electrical Connection Fig. 7.10 This appliance must be installed by a qualified electrician to comply with the relevant regulations (AS/NZS 60335.2.6) and also the local electricity supply company requirements. -
Page 32: Final Checks
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Final Checks Fig. 7.14 Note: The clock must be set before the ovens will work. See ‘The Clock’ section for instructions on setting the time of day. Hotplate Check Check each burner in turn. -
Page 33: Conversion To Propane Gas
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. 8. Conversion to Propane Gas Conversion from Natural Gas (1.0 kPa) Fig.8.1 to LPG X Propane (2.54 kPa) This conversion must be performed by a competent person, in accordance with these instructions and with the local supply company requirements. -
Page 34: Set The Governor
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. Set the Governor Fig.8.4 Unscrew the governor’s brass top. In the base of the brass top is a plastic snap-in converter device (Fig.8.4). -
Page 35: Servicing
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 9. Servicing BEFORE SERVICING ANY GAS CARRYING Fig. 9.1 COMPONENTS TURN OFF THE GAS SUPPLY Check the appliance is gas sound after completion of service. -
Page 36: Control Panel
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. Reassemble in reverse order, making sure that you 2.6 To Change a Hotplate Burner Thermocouple reconnect the leads. -
Page 37: Ovens
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 4 Ovens Fig. 9.3 4.1 To Remove the Oven Inner Back Standard burner Main Oven Only Open the main oven door. - Page 38 WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. Top Element Fig. 9.7 Open the left-hand oven door and undo the fixings that secure the heat shield. Remove the top element bracket fixings and withdraw the element.
- Page 39 WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 4.7 To Replace an Oven Thermostat Fig. 9.9 DISCONNECT FROM THE ELECTRICITY SUPPLY. Remove the control panel (see 1.1) and hotplate top (see 2.1).
-
Page 40: Doors
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 5 Doors Fig. 9.10 5.1 To Replace an Oven Door Open the oven door fully and place the supplied holding pins in the drop down hinges (Fig. -
Page 41: Circuit Diagram
10. Circuit Diagram P028728 P057681 The connections shown in the circuit diagram are for single-phase. The ratings are for 230 V 50 Hz. Code Description Code Description Code Colour Left-hand oven multi-function switch Right-hand oven top element (inner) Blue Left-hand oven multi-function oven Right-hand oven base element Brown thermostat... -
Page 42: Technical Data
11. Technical Data DocAUS.102-0002 - Technical data - 90DF - Prof+ This cooker is designed for use on Natural Gas, although a conversion for LP (LPG X Propane (2.54 kPa) gas is packed with the cooker. INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Cooker back. - Page 43 Notes...
- Page 44 Clarence Street, Royal Leamington Spa, Warwickshire, CV31 2AD, England. Tel: +44 (0) 1926 457400 Fax: +44 (0) 1926 450526 E-mail: consumers@falconappliances.co.uk...
Need help?
Do you have a question about the Professional+100 FX Dual Fuel and is the answer not in the manual?
Questions and answers