Table of Contents
Advertisement
Baud Rate
Use this menu to configure the baud rate for Port 1 for external control
of the unit via RS232. Rotate the Jog to select a baud rate from the menu.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
Port 2
The RS232 port 2 is used for Event Generation and ASCII Text Insertion. See Section 7 for the RS232
Protocol required to perform these functions.
Main Menu → Communications → RS485
q
Connect several units to a single keyboard, or vice-versa. Up to
32 units (any combination of multiplexers and keyboards) can be
networked together. Use this menu to specify the units unique network address.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
Main Menu → Communications → Ethernet Settings
q
An ethernet connection can be used to connect to the unit from a
PC for viewing of live or recorded images. Use this menu to configure
the Ethernet communications settings. Select from the following:
Ethernet: Select Enable or Disable.
IP Address / Subnet Mask / Gateway: Consult with a qualified
Network Administrator or an MIS professional to configure these settings.
3.16 Front Panel Lock
Use this feature to lock the front panel keypad. While locked,
the only operational key on the front panel is the Menu button.
To unlock the front panel, enter the Installer password and return
to this menu.
Highlight the item you wish to select.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
0150-0198B
46
1200 Baud
2400 Baud
4800 Baud
9600 Baud
19200 Baud
38400 Baud
57600 Baud
Network Address
01
Ethernet Settings
Ethernet
:
Enable
IP Address :
10. 90.253. 22
Subnet Mask: 255.255.
0.
Gateway
:
10. 90.
0.
[CANCEL]
[OK]
Unlock Keyboard
Lock Keyboard
e
Calibur DVMR
Triplex eZ
0
1
Advertisement
Table of Contents
