Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Erbauer ERI603COM
Summary of Contents for Erbauer ERI603COM
- Page 1 ERI603COM 18V COMBI DRILL ERI603COM...
- Page 2 Original Instructions (Version 1.0)
- Page 3 Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This product should give you reliable service but for your peace of mind this power tool does carry a 2 year guarantee, the terms of which are detailed below.
-
Page 4: General Power Tool Safety Warnings
General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 5 Liquid ejected from the battery may cause irritation or burns. Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 18V COMBI DRILL ERI603COM...
- Page 6 ADDITIONAL SAFETY RULES FOR YOUR COMBI DRILL 1. Wear ear protectors when use impact drilling. Exposure to noise can cause hearing loss. 2. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. 3. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring.
- Page 7 Warning: If a small amount of electrolyte should leak from the battery pack under extremes of temperature or after heavy use, then wash off immediately from your skin and hands using clean water. For eye contact, rinse thoroughly with clean water and seek medical treatment immediately. 18V COMBI DRILL ERI603COM...
- Page 8 ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST The updated Control of Substances Hazardous to Health Regulations 1st October 2012 now also targets to reduce the risks associated with silica, wood and gypsum dusts. Construction workers are one of the at-risk groups within this because of the dust that they breathe: silica dust is not just a nuisance;...
- Page 9 The use of other tools will reduce the users’ total working period on this tool. Helping to minimise your vibration exposure risk. ALWAYS use sharp chisels, drills and blades. Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate). 18V COMBI DRILL ERI603COM...
- Page 10 Avoid using tools in temperatures of 10ºC or less. Plan your work schedule to spread any high vibration tool use across a number of days. Health surveillance All employees should be part of an employer’s health surveillance scheme to help identity any vibration related diseases at an early stage, prevent disease progression and help employees stay in work.
- Page 11 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. yyWxx Manufacturing date code; Year of manufacturing (20yy) and week of manufacturing (Wxx); 18V COMBI DRILL ERI603COM...
- Page 12 KEYLESS CHUCK TORQUE ADJUSTMENT RING TWO-SPEED GEAR CONTROL FORWARD/REVERSE ROTATION CONTROL SOFT GRIP HANDLE BATTERY PACK * BATTERY PACK RELEASE BUTTON BELT HOOK ON/OFF SWITCH SIGHT LIGHT * Not all the accessories illustrated or described are included in standard delivery.
-
Page 13: Technical Data
A weighted sound pressure : 87.1dB(A) A weighted sound power : 98.1dB(A) & K 3.0dB(A) Wear ear protection when sound pressure is over 80dB(A) ACCESSORIES 2.0 Ah Lithium Battery Pack(ERI606BAT) 2pcs 1hr Charger (ERB607CHR) Belt hook 18V COMBI DRILL ERI603COM... -
Page 14: Intended Use
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE: The machine is intended for driving in and loosening screws as well as for drilling in wood, metal and plastic. BEFORE PUTTING INTO OPERATION A) CHARGING THE BATTERY The battery charger supplied is matched to the Li-ion battery installed in the machine. -
Page 15: Charging Indicator
2. ON / OFF SWITCH (See Fig. 3) Depress the On/Off switch to start and release it to stop your drill. The on/off switch is fitted with a brake function which stops your chuck immediately when Fig. 3 you quickly release the switch. 18V COMBI DRILL ERI603COM... -
Page 16: Switch Lock
Fig. 2-2 It is also a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression. WARNING: Do not operate for long periods at low speed because excess heat will be produced internally. -
Page 17: Using The Sight Light
To turn on the light simply press the on/off switch. When you release the on/off switch, the light will be off. LED lighting increases visibility-great for dark or enclosed area. LED is also a battery capacity indicator. It will flash when power gets low. 18V COMBI DRILL ERI603COM... -
Page 18: Disposal Of An Exhausted Battery Pack
10. DRILLING When drilling into a hard smooth surface, use a center punch to mark the desired hole location. This will prevent the drill bit from slipping off center as the hole is started. Hold the tool firmly and place the tip of the bit at the point to be drilled. -
Page 19: Problem Solution
Do not re-charge your battery pack below 0 C and above 45 C as this will affect performance. 18V COMBI DRILL ERI603COM... -
Page 20: Maintenance
MAINTENANCE Your tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. -
Page 21: Plug Replacement
5 Amp fuse approved to BS1362 Connect Blue to N Brown L(live) (neutral) Outer sleeve Cable grip firmly clamped 18V COMBI DRILL ERI603COM... -
Page 22: Declaration Of Conformity
EN 60745-2-1 EN 60745-2-2 EN 60335-1 EN 60335-2-29 EN 61000-3-2 EN 61000-3-3 EN 62233 Authorised Signatory and technical file holder Date: 08/18/2014 Signature: Name / title: Peter Harries / Quality Manager Erbauer (UK) Ltd. Trade House, Mead Avenue, BA22 8RT...
Need help?
Do you have a question about the ERI603COM and is the answer not in the manual?
Questions and answers