Ver. 3.0 - Panasonic UF-9000 Service Manual

8.1.4. User Authentication Function Confirmation (Specified Destinations only)
(Incorporated into production, starting with Serial No. prefix CF [March 2006] and above)
If your customer requires User Authentication, first verify whether your machine has this feature, or verify
that the machine's Firmware version is 4 or later by following the steps below. If the version is below 4, then
you cannot add this feature.
Once the version is confirmed, setup the User Authentication feature by referring to the Operating
Instructions (For User Authentication).
8.1.4.1. Checking whether the User Authentication is available
1. Press the "COPY" key to enter the Copy Function Mode.
2. Press the "FUNCTION" key to enter the Function Mode.
3. Press the "1" key, and then press "SET" key to enter the General Settings Mode.
4. Press the "9" key to enter the Key Operator Mode.
5. Input the 3 Digit Code, and then press "SET" key. (Default setting "000")
6. Press the "3" key twice, if "33 USER AUTH 1:COPY" displays on the LCD, this signifies that User
Authentication is available on the machine.
7. Press the "RESET" key, to exit the General Settings mode.
8. If "33 USER AUTH 1:COPY" is not displayed on the LCD, then you cannot add this feature.
8.1.4.2. Checking the Firmware Version with the General Settings List
1. Press the "COPY" key to enter the Copy Function Mode.
2. Press the "FUNCTION" key to enter the Function Mode.
3. Press the "1" key, and then press "SET" key to enter the General Settings Mode.
4. Press the "9" key to enter the Key Operator Mode.
5. Input the 3 Digit Code, and then press "SET" key. (Default setting "000")
6. Press the "0" key, and then press "SET" key.
7. Press the "SET" key, to print the GENERAL SETTINGS LIST.
8. Verify the Footer of the printed List. For example "******* DP-190 v4 *******".
9. If the firmware is below version 4 (For example "******* DP-190 *******"), then you cannot add this
feature.

Ver. 3.0

271
UF-9000
DP180/190
APR 2006