Table of Contents
Advertisement
Accepting a callback
Step
by
The handset rings with a specific ring tone and the callback number is shown
Step
on the display.
Press
1.
Deleting a callback
The handset rings and the callback number is shown on the display.
Confirm [DELETE]. The callback is deleted.
1.
Checking or deleting the callback number
Press
1.
Select using [
2.
The current callback number is shown on the display.
Confirm [BACK]. The callback remains active.
3.
or
Confirm [DELETE]. The callback is deleted.
3.
Call waiting - CW
Call waiting - activating/deactivating CW see page 25.
Accepting/rejecting external call waiting
You hear the call waiting tone during your call (internal or external).
1.
Confirm [ACCEPT]. You accept the waiting call and the first call is put on hold.
Both parties are shown on the display, the current party is highlighted.
or
Confirm [REJECT]. Reject the waiting call.
1.
Ending an active call
Press
1.
2.
Confirm with [OK]:
Forwarding waiting calls internally
You can forward waiting calls internally without taking the call.
1.
Press
Select using [
2.
Continue the active call.
Holding calls (Call Hold)
Putting external subscribers on hold
You are engaged in an external call.
Press [INT]: The external subscriber is put on hold.
1.
The waiting external subscriber hears music-on-hold. You can conduct an
internal enquiry call.
As soon as the internal subscriber ends the enquiry call, [BACK] appears on the
2.
display for 10 seconds. Pressing [BACK] reconnects you to the external caller.
If this option is not used, the ring tone sounds again after 10 seconds.
or
To end the internal call, press
2.
by [OK]. You are then returned to the external call and the internal subscriber
hears the busy tone.
38
D
: the connection is established.
or *for selection menus.
] and [OK]:
Service Set up or Base Set up
or *for the menu.
End
.
or *for the menu.
],
Forward
and [OK]: (internal subscriber) .
or *for the menu and select [End] followed
o
o
Status
Callback
.
Advertisement
Table of Contents
