Gioteck VX1PS3-21 Setup Manual page 2

VX-1 PC SET UP
1. Plug the cable from your VX-1 Wired
Controller into a USB Port on PC.
The driver will be installed automatically.
2. Channel 1 LED on the controller will
illuminate. The controller is now ready
to use in "Digital mode".
3. Press the Home Button to switch from
Default "Digital Mode" to "Analogue Mode".
4. To check/change the default key mapping and functions, go to:
Control Panel > Devices and Printers > Settings >
Gioteck PS3 Wired Controller > Properties.
PC
PC
Digital mode
Analogue mode