Joining The Two Appliances Together - Miele FN 11827 S Operating And Installation Instructions

Installing in a side-by-side combination
Joining the two appliances
together
The following fastening components are
supplied:
* Colour is model dependent (the other
colour variation is not required)
The following tools are supplied:
r Spanner SW 10
q Allen key SW 2
(not required)
The following tools are also required:
– Spirit level
– Cordless screwdriver
– Torx screwdriver
36
®
25
^ Before starting, peel off any
protective foil from the appliance
casing.
Assembly steps on the appliance
fronts
^ Screw in the feet a for supporting
the appliance doors with the spanner
r supplied. They are not allowed to
come in contact with the floor.
^ Attach the caps a to the front feet.
^ Place the appliances next to one
another so that the fronts are aligned,
leaving a gap of 10 mm between
them.