Before Operation; Paper/Ink Ribbon Set; Loading Print Paper - Mitsubishi Electric CP30DW Operation Manual

BEFORE OPERATION

Before printing,
1. Turn on the power of this unit.
2. Load print paper into the paper cassette.
3. Load the paper cassette with print paper into the unit.
4. Load a ribbon cartridge to the unit. (page 14)
5. Install the printer driver. (page 16)
Make sure to use the following types of paper sheet and ink ribbon set.
2 2 2 2 2

PAPER/INK RIBBON SET

Model
CK30S
CK30L
CK30S4P
CK30L4P
Adjust the paper cassette to the size of the paper to be loaded. Do not force
paper that is too long or too wide into the paper cassette.
• Use the paper cassette designed for this unit only.
1 1
1 1 1
Remove the tray (cover) of the paper cassette and the
spacer.
2 2 2
2 2
Take the print paper out of the packaging together with
the protection sheet.
• The protection sheet is placed on the top of the print paper to protect
the printing surface. Hold the print paper together with the protection
sheet so that you do not touch the printing surface. Fingerprints or
dust on the paper's surface may degrade the print quality.
3 3 3 3 3
Loosen the paper together with the protection sheet.
• The paper may be stuck together. Loosen it well.
• Take care not to drop the print paper.
12
PAPER/INK RIBBON SET
Size No. of prints
S size 80
L size 50
S size 60
L size 40

LOADING PRINT PAPER

NOTE
NOTE
NOTE
Usage Remarks
Color print 3 packs contained
Color print 4 packs contained
Color print 3 packs contained
(with surface lamination)
Color print 4 packs contained
(with surface lamination)
Spacer
Tray (cover)