Toshiba e-Studio 281c Operator's Manual For Basic Function page 308

5.Jam Symbols (Cont.)
5
Return the Hole Punch Unit to the origi-
nal position and close the front cover.
6
Open the upper cover of the Finisher
until it locks.
7
Remove any misfed paper.
9
8
Close the upper cover.
Releasing a paper misfeed in the Hanging Finisher (optional: MJ-1022)
1
Pull the lever and move the finisher care-
fully away from the equipment.
306
9.BLINKING GRAPHIC SYMBOLS