Toshiba e-Studio 281c Operator's Manual For Basic Function page 14

General Precautions (Cont.)
Caution
• Avoid placing the Multifunctional Digital Color Systems in a place unsuitable for its weight and also
make sure the surface is level.
Remember that if the Multifunctional Digital Color Systems falls over, serious injuries could result.
Weight of the Multifunctional Digital Color Systems: approx. 249 lb.
• There are 4 adjusters (stoppers) on both sides (2 adjusters each) and 2 safety stoppers in front at the
bottom of the Paper Feed Pedestal and the large capacity feeder. After moving/installing the equip-
ment, be sure to turn and lower the adjusters, and then fix them firmly on the floor. After regulating the
adjuster, fix the safety stopper as well.
Before moving the equipment, turn and raise the safety stoppers and adjusters.
• When removing the plug from the outlet, do not pull the power cord. Always hold the plug when remov-
ing it from the outlet. If the power cord is pulled, the wires may become broken and this could cause a
fire or give you an electric shock.
• Make sure that the ventilation holes are not blocked up.
If the temperature within the Multifunctional Digital Color Systems becomes too high, a fire could result.
• When connecting the optional equipment and interface cable to the Multifunctional Digital Color Sys-
tems, be sure to turn the power OFF. If the power is not turned off, you could get an electric shock.
To turn the power OFF, see
Do not install the equipment by yourself or try to move it once it has been installed. This could result in an
injury or damage to the device. Contact your service representative if the equipment needs to be installed
or moved.
12
P.42 "Turning power off (Shutdown)".