Advertisement
Advertisement
Table of Contents
Related Manuals for LifeSpan RW1000
Summary of Contents for LifeSpan RW1000
- Page 1 Innovative Fitness Solutions...
-
Page 3: Main Contents
Main frame x 1 Pedal x 2 Middle base stand x 1 Pedal Axle x 1 Display Part# Description Main Frame Sliding Rail Rear Suppot Stand Middle Base Stand Left Drive Cover Right Drive Cover Pedal Resistance System Seat 10 Seat Support 11 Rollers, Seat 12 Pull handle 13 End Plugs, Handle... -
Page 4: Exploded View
Exploded View... - Page 5 STEP 1: ATTACH SEAT TO SLIDING RAIL a. Remove the 4 Allen Head Screws from the back of the seat. b. Place the seat over the seat bracket and tighten all four screws. STEP 2: ATTACH MIDDLE BASE TO MAIN FRAME a.
-
Page 6: Pedal Assembly
STEP 3: ATTACH SEAT RAIL TO MAIN FRAME a. Line the seat rail directly behind the main frame and attach the wire connectors coming from the seat rail and main frame. STEP 4: PEDAL ASSEMBLY a. Remove the an Allen screw and washer from one end of the pedal axle. b. -
Page 7: Operation
INSERT DISPLAY CONSOLE a. Insert supplied AA battery into the back of display. b. Connect the cable inside the hole in the front of the main frame with the connector on the back of the console. OPERATION RESISTANCE - To increase the tension turn the adjustment knob to a higher number and to reduce the tension, turn the knob to a lower number. - Page 8 FOLDING a. To fold the rower, lift up the sliding rail near the pedal axle to relieve pressure from the locking pin. b. Remove the locking pin. c. Lift the seat rail into the upright position and replace locking pin. PLEASE READ ALL WARNING LABELS PRIOR TO USE...
Need help?
Do you have a question about the RW1000 and is the answer not in the manual?
Questions and answers