Panasonic KX-NS700 Operating Manual page 172

1.4.1 Call Log, Incoming
The incoming call log information is displayed as follows:
[With Caller's Name]
------------------------------------ Caller's name (max. 20 digits)
Catherine
OCT.27 4:30PM
New : Not Answered
1234567 --------------------------------------- Caller's number (max. 16 digits)
EXIT
[Without Caller's Name]
--------------------------------------- Caller's number (max. 16 digits)
1234567
OCT.27 4:30PM
Old : Not Answered
EXIT
*: "New" is displayed for call logs which have not previously been viewed;
"Old" is displayed for call logs which have previously been viewed.
•
•
•
•
•
To view the log information with the Call Log button
Display PT
While on-hook
(Call Log)
Press Call Log until
desired party appears.
172 Operating Manual
THU --------------- Date and time the call was received
----------------- Answering Status*
CLEAR
THU --------------- Date and time the call was received
----------------- Answering Status*
CLEAR
PS users: Refer to the documentation for your phone.
KX-UT series SIP phone users: Both outside call information and intercom call
information is recorded automatically in the incoming call log. For details about using
the call log, refer to the documentation for your KX-UT series SIP phone.
The following PSs can use the incoming call log information in the same way as a wired
PT when they receive a call from other extension (including TIE).
KX-TCA185/KX-TCA285/KX-TCA385
PSs other than these may not display the same incoming call log information as a PT
connected to the PBX.
For details about referencing the incoming call log, refer to the PS's documentation.
Document Version 2014-11