Troubleshooting - Ariens 924124-ST926DLE, 924125-ST11528LE, 924126-ST11526DLE, 924127-ST11528DLE, 924128-ST1332LE, 924335-ST926DLE, 924336-ST11526DLE, 92 Owner's/Operator's Manual

Ariens snow blower owner/operator manual
Table of Contents

Advertisement

* Available in CE countries.
PROBLEM
Engine will not
crank/start.
Engine stops.
Engine
problems.
Does not
operate in
Forward /
Reverse.
Small rubber
beads collect in
frame
Unit throws
snow poorly or
does not throw
snow.

TROUBLESHOOTING

PROBABLE CAUSE
1. Fuel tank is empty.
2. Fuel shut-off valve closed.
3. Build up of dirt and residue
around governor/carburetor.
4. Key Switch not in run
position.
5. Ignition switch starter circuit
not functioning.
6. Battery discharged, wires
loose.
1. Out of fuel.
2. Fuel shut-off valve closed.
3. Mechanical jam in blower
rake or impeller.
4. Polluted fuel supply.
5. Faulty spark plug.
1. See Engine Manual.
1. Friction disc not adjusted
properly.
2. Traction belt not functioning.
3. Speed selector not adjusted
properly.
1. Friction disc wear.
1. Shear bolts broken.
2. Attachment clutch/brake not
adjusted properly.
3. Attachment drive belt worn or
damaged.
CORRECTION
1. Fill fuel tank.
2. Open fuel shut-off valve.
3. Clean area around
governor/carburetor.
4. Put Key Switch into run position.
5. Check for a bad starter or
connections.
6. Check battery and connections.
1. Fill fuel tank.
2. Open fuel shut-off valve.
3. Turn off engine, remove key, and
wait for all moving parts to stop.
Check for and remove obstruction
and repair before restart.
4. Replace with clean fuel.
5. Replace or clean spark plug.
1. Repair or replace friction disc. See
Service and Adjustments.
2. Repair or replace traction drive
belt. See Service and
Adjustments.
3. Adjust speed selector. See Service
and Adjustments.
1. Normal friction disc wear. Chunks
or large pieces of rubber mean
friction disc should be checked
and replaced as necessary.
1. Replace shear bolts (see Shear
Bolts on page 23).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment on page 24).
3. Replace attachment drive belt (see
Attachment Clutch/Brake
Adjustment on page 24).
GB - 28

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 924124-ST926DLE, 924125-ST11528LE, 924126-ST11526DLE, 924127-ST11528DLE, 924128-ST1332LE, 924335-ST926DLE, 924336-ST11526DLE, 92 and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF