Sv Rise Rate, Sv Fall Rate Setting Action - Panasonic KT4H User Manual

11.11 SV rise rate, SV fall rate setting action

[46] SV rise rate and [47] SV fall rate can be set in the Setup mode. (p.21)
When the SV is adjusted, it approaches the new SV by the preset SV rise rate or SV fall rate.
When SV is adjusted while SV is rising (or falling), SV at the given time becomes a starting point, and
approaches the new SV.
When power is turned on, from PV the SV approaches the new SV.
SV can be changed with keypad operation, Serial communication function and Set value memory external
selection function.
Not available when set to 0
(e.g.) When changing SV from 200
[When SV rise rate and SV fall rate are set to 0 /Min]
Temperature
[When SV rise rate is set to 60 /Min, and SV fall rate is set to 0 /Min]
Temperature
300 C
240
200
[
When SV rise rate is set to 60 /Min, and SV fall rate are set to 30 /Min]
Temperature
300 C
240 C
200
C
/Min (0/Min).
C
300
SV display 300
240
C
C
200
SV changes
C
C
SV changes
After SV has been changed,
SV rises from 200
by the rate of 1 /sec.
SV changes
After SV has been changed,
SV rises from 200
by the rate of 1 /sec.
300 240
C
SV changes
SV display 300 C
200 C (on the SV display) approaches 300
by the SV rise rate.
SV changes
to 300
300
by the SV fall rate.
SV display 300 C
200 (on the SV display) approaches
C
300 C by the SV rise rate.
SV changes
to 300
34
SV display 240
C
Time
SV display 240 C
Time
C
(on the SV display) approaches 240
SV display 240 C
Time
After SV has been changed,
SV falls from 300 to 240
by the rate of 0.5 /sec.
C
C