I V . B A T T E R I E S A N D C H A R G I N G
Your Travel Scooter requires two long-lasting, 12-volt, deep-cycle batteries that are sealed and maintenance free.
They are recharged by the supplied off-board charging system.
! Charge your Travel Scooter's batteries for 8 to 14 hours prior to using it for the first time.
! Keep the batteries fully charged to keep your Travel Scooter running smoothly.
READING YOUR BATTERY VOLTAGE
The battery condition meter on the tiller console indicates the
approximate strength of your batteries using a colour code.
From right to left on the meter, green indicates fully charged
batteries, yellow a draining charge and red indicates that an
immediate recharge is necessary. See figure 14. To ensure the
highest accuracy, the battery condition meter should be checked
while operating your Travel Scooter at full speed on a dry, level
surface.
CHARGING YOUR BATTERIES
PROHIBITED! Removal of grounding prong can create electrical hazard. If necessary,
properly install an approved 3-pronged adapter to an electrical outlet having 2-pronged
plug access.
PROHIBITED! Never use an extension lead to plug in your battery charger. Plug the charger
directly into a properly wired standard electrical outlet.
PROHIBITED! Do not allow unsupervised children to play near the Travel Scooter while
the batteries are charging. Pride recommends that you do not charge the batteries while
the Travel Scooter is occupied.
MANDATORY! Read the battery charging instructions in this manual and in the manual
supplied with the battery charger before charging the batteries.
WARNING! Explosive gases may be generated while charging the batteries. Keep the Travel
Scooter and battery charger away from sources of ignition such as flames or sparks and
provide adequate ventilation when charging the batteries.
WARNING! You must recharge your Travel Scooter's batteries with the supplied off-board
charger. Do not use an automotive-type battery charger.
WARNING! Inspect the battery charger, wiring and connectors for damage before each
use. Contact your authorised Pride Provider if damage is found.
WARNING! Ensure that both ends of the charger power lead are clean and dry before
plugging the charger power lead into the charger power lead receptacle or the electrical
outlet.
WARNING! Do not attempt to open the battery charger case. If the battery charger does
not appear to be working correctly, contact your authorised Pride Provider.
WARNING! If the battery charger is equipped with cooling slots, then do not attempt to
insert objects through these slots.
22
www.pridemobility.com
Figure 14. Battery Condition Meter
Elite Traveller
Need help?
Do you have a question about the Go-Go ELITE TRAVELLER and is the answer not in the manual?
Questions and answers
Should the charger on the Pride Mobility Gigi elite scooter light up red while charging and green when charged?
Yes, the charger on the Pride Mobility Go-Go Elite Traveller has an indicator light that changes from red while charging to green when fully charged.
This answer is automatically generated
What is the distance the batteries will go?
The battery range for the Pride Mobility Go-Go Elite Traveller is up to 8.8 miles with the standard 12 amp hour battery pack, and up to 13.8 miles with the optional 18 amp hour battery pack.
This answer is automatically generated
Does the free light mean it charge does it have to be solid or blinking
Dose the charger light have to be solid green when charging or is blinking ok