Advertisement
Electrical Work
• Electrical work must be performed by a legally qualifi ed electrician.
• Be sure to establish the earth connection. (Provide socket wiring for
single-pole earthing.)
Note
• Wire the appliance following local regulations concerning wiring, earthing and
safety applied in the area.
• Install the socket at a location where it can be easily disconnected in an emergency.
• Be careful of the plug's direction, avoiding twist of or load on the power cord.
Single-phase 220 V/20 A (with a circuit breaker)
Electric wire for house wiring
Dedicated
Single wire of at least 2.0 mm in diameter
circuit
• Stranded wire of at least 3.5 mm
for the wall socket (box type).
Rated current
• KY-E227D:
30 A
Earth leakage
Rated sensitivity current:
circuit breaker
* In accordance with the electrical wiring rules,
incorporate the breaker and the earth leakage circuit
breaker in the home electrical wire.
Type of socket
• KY-E227D:
BS546 type
(15 A)
Installation Location
Wall socket
• Built-in:
Install the socket at a location
where the plug can be
disconnected after installation.
• Free-standing:
Install the socket at a location where it is not exposed
to hot air, water or splattered food.
6
Warning
can also be used
2
• KY-C227D/KY-A227D:
20 A
30 mA
• KY-C227D/KY-A227D:
BS1363 type
Installing the Appliance
Warning
• Do not disassemble the top plate.
Before installation, remove the serial number sticker on the back of the appliance.
1) Tear off along perforation.
Fig.: Built-in setting
1
Template
• Lay it to avoid
damage of the
countertop.
2
• Insert
horizontally.
2) Attach it on the Guarantee Certifi cate.
Attach here.
Serial No.
Free-standing
1
Insert the plug to the socket.
• Do not place paper or sheet under
the appliance.
Built-in
1
Insert the plug to the socket.
2
Embed the appliance
in the countertop cutout.
• Do not drop the appliance on the
countertop.
• Make sure that the spaces between
the countertop and the edge of the
bottom surface of the top plate are
even in the front, back, right and left.
(If the power cord is caught between
the appliance and the cabinet, the
appliance body fl oats and the spaces
are uneven.)
7
Advertisement
