Ar-Reb1E - Fujitsu AU*G07LVLA Technical Manual

13-2-3.

AR-REB1E

„ „
SWITCHING SELECTION OF FUNCTION SETTING MODE
(2) Press and hold the "POWERFUL" and "TEMP.
press the "RESET" button.
„ „
CONFIRMATION OF CUSTOM CODE
(3) Press the "TEMP.
buttons to select the custom code that
matches the setting with the indoor unit.
By selecting the appropriate custom code,
the communication between the indoor unit
and the wireless RC becomes possible.
POWERFUL
TEMP. ( )
RESET
" or "TEMP. "
CUSTOM CODE
( - - - )
The initial setting is " "
- (01-159) -
" buttons. While holding these 2 buttons,
(4) Press the "MODE" button to send the code
to the indoor unit.
Function setting
mode display
Pi Pi