Ar-Rah2E / Ar-Rah1E - Fujitsu AU*G07LVLA Technical Manual

13-2-1.

AR-RAH2E / AR-RAH1E

„ „
SWITCHING SELECTION OF FUNCTION SETTING MODE
(2) Press and hold the "FAN" and the " SET TEMP.
press the "RESET" button.
„ „
SELECTION AND CONFIRMATION OF CUSTOM CODE
(3) Press the " SET TEMP.
" buttons to select the custom
q
TEMP.
code that matches the setting with the
indoor unit. By selecting the appropriate
custom code, the communication between
the indoor unit and the wireless RC
become possible.
CUSTOM CODE
( - - - )
The initial setting is " "
FAN
SET TEMP. ( )
RESET
" or " SET
p
- (01-149) -
" buttons. While holding these 2 buttons,
p
Function setting
mode display
(4) Press the "TIMER MODE" button to send
the code to the indoor unit.
Pi Pi