Press down firmly until the processor installation tool clicks and separates from the processor, and
8.
then remove the processor installation tool.
Close the processor socket retaining bracket and the processor retaining latch.
9.
Install the heatsink. See the server installation sheet.
10.
Install the access panel.
11.
Installing a processor in other HP ProLiant 100 Series Servers
CAUTION: To prevent possible server malfunction and damage to the equipment, do not mix single- and
dual-core processors or processors with different speeds or cache sizes.
Power down the server (on page 6).
1.
Extend the server from the rack, if applicable.
2.
Remove the access panel
3.
Open the processor retaining bracket.
4.
Release the processor locking lever.
5.
("Access
panel" on page 6).
Hardware options installation 15