Installing A Processor In Hp Proliant Ml110 (G2, G3, And G4) And Proliant Ml150 Generation 2 Servers - HP ProLiant ML100 Series User Manual

Close the processor socket retaining bracket and the processor retaining latch.
9.
Install the heatsink. See the server installation sheet.
10.
Install the access panel.
11.
Installing a processor in HP ProLiant ML110 (G2, G3, and G4)
and ProLiant ML150 Generation 2 Servers
CAUTION:
single- and dual-core processors or processors with different speeds or cache sizes.
Power down the server (on page 6).
1.
Extend the server from the rack, if applicable.
2.
Remove the access panel
3.
Open the processor retaining bracket.
4.
Release the processor locking lever.
5.
CAUTION:
seating during installation, leading to hardware damage.
Install the processor and close the processor retaining bracket. Refer to the installation sheet for
6.
server-specific installation instructions.
CAUTION:
completely close the processor locking lever.
To prevent possible server malfunction and damage to the equipment, do not mix
("Access panel" on page 11).
Failure to completely open the processor locking lever prevents the processor from
To prevent possible server malfunction or damage to the equipment, be sure to
Hardware options installation 15