System Date And Time - SMAX AU1 User Manual

Chapter 6.

6.1.1.3. System date and time

Get or set the system date and time
Syntax:
---------------------------------------------------------------------------
http:// camera_ip:port /cgi/admin
/date.cgi?action=<value>
[&<parameter>=<value>...]
---------------------------------------------------------------------------
with the following parameters and values for
reference:
<parameter>=<value> Value
action=<string> get,
set
year=<string> <string>
month=<string> <string>
day=<string> <string>
hour=<string> <string>
minute=<string> <string>
second=<string> <string>
w w w . s m a x . c o m . t w
Description
get = get the current date
and time.
set = set the current date
and time.
Current year.
Current month.
Current day.
Current hour.
Current minute.
Current second.
<parameter>=<value> Value
timezone=<string> 0-56
Description
Specify the time zone for
the new date and/or time.
The
device will translate the
time into local time using
whichever the time zone
has been specified through
the
web configuration. If
omitted the new date
and/or time is
assumed to be for local time.
Note: The daylight saving
time (DST) must be turned
off,
In this edition, the time
mode doest not support to
synchronize with an NTP
server and with the
computer
time.
Currently only GMT is
considered valid input. The
rest of
the time zones are subject
to future edition.
P 69