1. Manuals
  2. Brands
  3. SMAX Manuals
  4. Security Camera
  5. AU1
  6. User manual

SMAX AU1 User Manual

2mp ip66 small bullet camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

w w w . s m a x . c o m . t w
A
2MP IP66 Small Bullet Camera
U1
User
Manual
Ver 1.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AU1 and is the answer not in the manual?

Questions and answers

Related Manuals for SMAX AU1

Summary of Contents for SMAX AU1

  • Page 1 w w w . s m a x . c o m . t w 2MP IP66 Small Bullet Camera User Manual Ver 1.2...

  • Page 2: Table Of Contents

    1.5. Electromagnetic Compatibility Chapter 5. Chapter 2. 5.1. System Setup 2.1. Hardware Installation 5.2. Network Setup 2.2. SMAX Finder Installation 5.3. Video & Audio Setup 2.3. Ready to Use 5.4. SD Card Setup Chapter 3. 5.5. Event Setup 3.1. Network Deployment 5.6.
  • Page 3 CONTENTS Chapter 6. 6.1. URL Commands 6.2. Technical Specifications 6.3. Onvif Supports List 6.4. Liability 6.5. Copyright w w w . s m a x . c o m . t w...

  • Page 4: Read Before Use

    This product service may be different since the diversity of distributors. We suggest to purchase SMAX product from SMAX direct distributors or system integrators to get the most complete after service. Please first check the package contents are complete with nothing missing.

  • Page 5: Physical Description

    With its mini and compact design, it is suitable to locate in a environment like department store or shop counter. AU1 accept both POE power supply or DC 5V power supply. Please noted that the DC 5V adapter is an extra accessory which does not include in this package.
  • Page 6 Chapter I. w w w . s m a x . c o m . t w P 03...

  • Page 7: Safety Instructions

    Please check the correct direction when insert the SDHC card into camera device.  Please contact your sales channel or find a regional SMAX distributor for any warranty issues. w w w . s m a x . c o m . t w...

  • Page 8: Package Contents

    Chapter I. 1.4. Package Contents Description Network Camera, Sun shield Tools package (Screw Kit…etc.) A. Software: Network Camera, Sun shield SMAX Finder x 1 SMAX VMS64 x 1 B. Doc: SMAX All Products Datasheet, User Manual, Quick Installation Guide w w w . s m a x . c o m . t w...

  • Page 9: Electromagnetic Compatibility

    Chapter I. 1.5. EMC(Electromagnetic Compatibility) FCC Statement This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. (1.) This device may not cause harmful interference, and (2.)This device must accept any interference received, including interference that may cause undesired operation.
  • Page 10 Chapter 2. 2.1. Installation Setup 3. Setup 6. Please adjust viewing angle by Please re-mount the cover and tight loosen up below spot first. it up. Please follow below instructions to setup your network camera. Setup 1. Please attached sun shield to network camera.

  • Page 11: Smax Finder Installation

    192.168.1.1 Please read the CD from the package content. Then or NVR / VMS IP address: 192.168.1.88 copy SMAX Finder.exe file to your personal PC. Run Subnet Mask: 255.255.255.0 the program until the SMAX Finder windows display as Gateway: 192.168.1.1 shown on the right picture.
  • Page 12 Chapter 2. 2.3. Prepare to Access Access procedure: When link from SMAX Finder to the camera’s web UI access page, please enter default username and password (ID: admin / PW: admin) for further access. When first connect to a SMAX camera, it needs to install some plugin to your computer.
  • Page 13 3.1. Network Environment Setting Internet 網際網路 SMAX camera supports both intranet and internet structure. Hereby to supply different ways of network setting when SMAX camera is under internet environment structure. Network Camera xDSL Modem A. True IP address setting 4+2 ports...
  • Page 14 Chapter 3. 3.1. Network Environment Setting A. True IP address setting Please run the SMAX Finder and search for the camera within local LAN. Select the camera for internet setting and click Change IP button. Select static mode and enter your true IP address, Subnet mask, Default gateway, and the username and password of the camera.
  • Page 15 Chapter 3. 3.1. Network Environment Setting A. Transfer from UPnP router Please access to the camera’s web UI page and select Configuration button. Select Network button. Please assign a static IP address of your local network. And enter your gateway address and DNS numbers of your router.
  • Page 16 Chapter 3. 3.1. Network Environment Setting A. PPPoE connection setting Please access to the camera’s web UI page and select Configuration button. Select Network button. Please select PPPoE and enter your username and password. Then press Apply button to finish setting. Notification：...
  • Page 17 SMAX network camera supports multiple connections for accessing. Includes multiple browsers connection, video player connection that supports RTSP, SmaxViewer APP connection, or SMAX VMS or CMS software to access. Each connection fulfill different surveillance application for different purpose. 3.2. Accessing via Web UI...

  • Page 18: Main

    Chapter 3. 3.3. Accessing via RTSP Player SMAX network camera supports accessing via RTSP player. Below using VLC player as a reference instruction: Please run the VLC player and select Media(M) button. Then select Open network stream(N). It will pop out the setting window.
  • Page 19 Chapter 3. 3.4. Accessing via Mobile APP SMAX network camera supports accessing via mobile APP with both iOS and Android system. Below using iPad mini as a reference instruction: Please download SmaxViewer from the APP store to your iPhone or iPad device.
  • Page 20 Setup 4. 3.5. Accessing via SMAX VMS Please select Setup.exe from the SMAX VMS folder of CD content. Follow installation procedure and setting. Then you can run the SMAX VMS software to use. 3.5.1. SMAX VMS Installation procedure： Setup 1.
  • Page 21 Chapter 3. 3.5. Accessing via SMAX VMS Start to use your SMAX VMS software by clicking the shortcut from your desktop after installation is complete. 3.5.1. SMAX VMS adding camera procedure： Run the SMAX VMS software and enter the Username and Password.
  • Page 22 There are two ways of adding new camera. One is search the camera within local LAN. Press Search button so the VNS will automatically search all SMAX camera within local LAN. Second way is to add camera over internet structure by entering IP address, HTTP port, Username, Password and Name.
  • Page 23 Chapter 3. 3.5. Accessing via SMAX VMS After search sever process, you may see the further detail setting if VMS is able link to your network camera. Please select all possible function that you wish to enable, such as Audio, Recording, PTZ and Operate camera.
  • Page 24 VMS. Notification ： For further SMAX VMS software setting or operation, please kindly refer to its manual. w w w . s m a x . c o m . t w P 21...

  • Page 25: Client Settings

    Chapter 4. 4.1. Home page You can access SMAX network camera via web browser to monitor live view, manage setting, SD card recording…etc. There is a complete introduction procedure of all function in the following chapter four and five. Homepage function list:...
  • Page 26 Chapter 4. 4.2. Client Settings 4.2.1. Protocol option This setting is to define your protocol option. Default set as RTSP/RTP over TCP. This protocol make sure that all image data must be transferred. But if you choose the image quality comes first, then you can change to RTSP/RTP over UDP.

  • Page 27: Maintenance

    Chapter 5. 5.1. Configuration Settings In the menu of configuration, it includes all operating function for settings, maintenance, log and device information…etc. Configuration menu as shown below： 1) System 2) Security 3) Network 4) IP Filter 5) Video 6) Audio 7) Motion Detection 8) Privacy Mask 9) Event...

  • Page 28: Configuration Settings

    Chapter 5. 5.1. Configuration Settings 5.1.1. System This system page display your network camera’s Host Name, LED Indicator ON/OFF Switch and set the Date and Time. Date and Time Setting procedure : Select your network camera’s Time Zone and enable Daylight Saving if needs to.
  • Page 29 Chapter 5. 5.1. Configuration Settings 5.1.2. Security Select Security button under the Configuration menu. It will goes to setting page. This function is to manage the user of this camera by setting Administrator and Account List. Administrator Setting Procedure : Please enter a new Password and Retype Password.
  • Page 30 Chapter 5. 5.1.2. Security Account List Setting Procedure : Please enter Username, Password, Retype Password. Notification： Username can be a composition of English letters and Arabic numerals. But the length must kept between 1~32 characters. No special character allow. And please keep notice between capital and lowercase English letters.

  • Page 31: Network Settings

    When your surveillance system has lower than 4pcs of network camera, we suggest to set DHCP IPv4/IPv6. You can search the camera’s IP with Smax Finder software. Please refer to chapter 3.1 for further description. If the total pcs of network camera is greater than 4pcs.
  • Page 32 Chapter 5. 5.2.1.1. Intranet Static IPv4/IPv6 Setting Static IPv4 Setting Procedure : Select Static IPv4/IPv6 under Network Type column. Please enter IP Address (IPv4), Subnet Mask, Gateway, Primary DNS and Secondary DNS information. Press Apply to complete setting. Notification： For static IP setting, please refer to the picture as shown on bottom right.
  • Page 33 Chapter 5. 5.2.1.2. Internet Static IPv4/IPv6 Setting Static IPv4 Setting Procedure : Select Static IPv4/IPv6 under Network Type column. Please enter IP Address (IPv4), Subnet Mask, Gateway, Primary DNS and Secondary DNS information. Press Apply to complete setting. Notification： Please contact your ISP service vender for further interne static IP setting.
  • Page 34 Chapter 5. 5.2.1.3. PPPoE Setting PPPoE Setting Procedure : Select PPPoE under Network Type column. Please enter Username and Password. Press Apply to complete setting. Notification： PPPoE is a type that supports xDSL network connection. Please contact your ISP service vender for the username and password.
  • Page 35 Chapter 5. 5.2.2. Advanced Network Setting Advanced network setting includes Multicast, Bonjour, Qos, DDNS, HTTPS function setting. 5.2.2.1. HTTPS Setting HTTPS Setting Procedure： Select Advanced page under Network page. Select Enable HTTPS. Default HTTPS Port set as 443. Press Apply to complete setting. w w w .
  • Page 36 Host Name, and let you do the setting on Username and Password. Notification： SMAX network camera provides three DDNS service website: DynDNS.org、TZO.com and No-ip. You can choose either one of the website to start you DDNS Host Name registration.
  • Page 37 For a multicast function is to send the stream data to one point, but you can set multiple computer as this point recipient. SMAX network camera is distinguished by the multicast group address. Its IP address range is from 232.0.0.0 to 232.255.255.255 in a class D. A class D is a group address which the network camera will send the stream packet to.
  • Page 38 Chapter 5. 5.2.2.4. QoS Setting Via QoS setting, it can ensure the video image and audio stream comes first in bandwidth. So the transfer stability will not effected by other network transmit packets. QoS Setting Procedure： Select Advanced page under Network page. Select Enable QoS.
  • Page 39 Chapter 5. 5.2.2.5. Bonjour Setting Bonjour is called as a Zero-configuration networking, which it can automatically find the device within local LAN network. Bonjour is a standardize protocol that allows for each device to find each other without a IP address or DNS server.
  • Page 40 Chapter 5. 5.2.3. IP Filter Smax network camera has an IP Filter function. It can manage to set a white list for Accepted IP list or black list for Deny IP list. We suggest to use one rule only to keep hte connecting performance.
  • Page 41 Chapter 5. 5.3. Video & Audio Setting This chapter includes all video setting, image adjusting, and two ways audio setting. Please kindly follow below chapter instruction to set the video setting accordingly.。 5.3.1. Video Setting 5.３.１.１. Main Stream Setting Main Stream Setting Procedure： Select Video button under the Configuration menu.
  • Page 42 Chapter 5. 5.３.１.１. Main Stream Setting Rate Control Setting Description: For a network camera only environment, we suggest to set the Video quality as Normal. If your surveillance environment is equip with NVR or NAS server for recording purpose, we suggest to set a constant Bitrate numbers.
  • Page 43 Chapter 5. 5.３.１.１. Main Stream Setting Main Stream and Storage Calculation: The best to set a constant Bitrate numbers is for easier calculation of recording storage space. Calculation of storage space as below for each network camera records for one hour. ----------------------------------------------------------------------- Bitrate(kbps) / 8 x 60(sec.) x 60(min.) / 1000 / 1000 = The storage space for each hour(GB)
  • Page 44 Chapter 5. 5.３.１.2. Secondary Stream(MJPEG) Setting Secondary Stream(MJPEG) Setting Procedure： Select Video button under the Configuration menu. Then goes to Video Setting page and select Enable under MJPEG column. Define your Video Resolution. There are three resolutions to choose from 720x480(Full D1), 640x480(VGA) and 320x240(QVGA).
  • Page 45 Chapter 5. 5.３.１.3. Mobile View Setting Mobile View Setting Procedure： Select Video button under the Configuration menu. Then goes to Video Setting page and select Enable under Mobile View column. Select with or without audio depends on your setting. Press Apply button to complete setting. Notification：...
  • Page 46 Chapter 5. 5.3.２. Focus Setting SMAX AU1 network camera is equip with f=3.6mm fixed Lens. In order to adjust the focus point, user needs to remove the front cover first. Focus Setting Procedure： Please remove the front cover. Set your browser to the main page and double click on the screen to the full screen mode.
  • Page 47 5.３.3.１. Exposure Setting SMAX network camera supply two Exposure Mode. Default set as Auto mode. User can change to Manual mode for further exposure setting of day and night mode.
  • Page 48 Chapter 5. 5.３.3.１. Exposure Setting Exposure Setting Procedure： Select Video button under the Configuration menu. Then goes to Image setting page and change the Exposure Mode from Auto to Manual. As an example picture on the right, the image is too dark during the night mode.
  • Page 49 Chapter 5. 5.３.3.2. Image Setting Image Setting Procedure： Select Video button under the Configuration menu. Then goes to Image setting page. Please enter appropriate Brightness, Contrast, Saturation and Sharpness numbers. Or use + and – button to do the adjusting. When above four numbers has changed, you can check the difference on the image.
  • Page 50 Chapter 5. 5.3.2. Motion Detection Motion Detection function allows you to set up to three windows on the screen. So these selected areas can detect motion base on the Percentage and Sensitivity numbers that you input. Motion Detection Setting Procedure： Select Motion Detection...
  • Page 51 Chapter 5. 5.3.3. Privacy Mask Privacy Mask function allows you to set up to three privacy mask that covers on your live view screen. It can be selected as different color with different mask. Once the mask has been set, the live view screen will no longer display those selected area.
  • Page 52 Chapter 5. 5.4. SD Card Settings Smax GU1 has built in micro SD card slot for continuous, schedule, event and alarm recording function. It also supply for searching recorded file. SDHC card maximum memory size is up to 32GB. 5.4.1. SDHC Setting new SD card procedure：...
  • Page 53 Chapter 5. 5.4.2. Recording Recording to SD card procedure： Select Recording button under the Configuration menu. Select Enable External storage Recording function and set the maximum size of each recording file. We suggest to set 50MB as the maximum. Arrange your recoding schedule of day and time under the Recording Schedule column.
  • Page 54 Chapter 5. 5.4.3. SD Card Recoding Search SD card recoding search procedure： Select Recording button under the SDHC page. Press All file button to see all recoding files from the SD memory card. Or you can search a specific period of recoding file by define your desire Start Time and End Time.
  • Page 55 Chapter 5. 5.4.3. SD Card Event Recoding Search When the event recording was triggered and saves to SD memory card. You can search all event files within Event page. SD card event recoding search procedure： Select Event button under the SDHC page. Press All file button to see all event recoding files from the SD memory card.
  • Page 56 You can set multiple event setting base on different needs of different applications. SMAX network camera has two was of event trigger settings： 1) Motion Detection 2) Digital Input signal Proceed actions includes：...
  • Page 57 Chapter 5. 5.5.1. Event Server Below is a description of Event Server. Before you set a new event, you can define a details of remote media server: FTP , SMTP and Samba. After setting, all event can proceed to your define FTP, SMTP or Samba Server by sending snapshots, e-mail or recording files.
  • Page 58 Chapter 5. 5.5.1.2. SMTP Server The main function of a SMTP server it to send an e- mail message when event was triggered. SMTP Server setting procedure： Select Event button under the Configuration menu. Then select Event server page. Select Enable SMTP server. Then enter your SMTP server’s IP address, Port, Sender e-mail address, Receiver #1 and #2 e-mail address and Subject.
  • Page 59 Chapter 5. 5.5.1.3. Samba Server Samba Server setting procedure： Select Event button under the Configuration menu. Then select Event server page. Select Enable Samba server. Then enter your Samba server’s IP address, Storage Path, Username and Password. Press Test SMB button to check if the Samba connection is successfully established.
  • Page 60 Chapter 5. 5.5.2. Media setting Media setting is to define what kind of media files should be save when a event was triggered. You can sent a snapshot or an event recoding file to your event server. Media setting procedure： Select Event button under the Configuration menu.
  • Page 61 Chapter 5. 5.5.3. Adding New Event Setting Below is an example procedure for adding a new event. It is trigger by motion detection. Schedule time set as always alert. And the action set to trigger SD care recording and digital output alarm. Example of adding new event procedure：...
  • Page 62 Chapter 5. 5.6. Maintenance Settings This maintenance page includes Reboot, Factory Reset, Backup, Restore, and Upgrade function. 5.6.1. Reboot Reboot procedure: When press Reboot button, it can remotely reboot the camera. 5.6.2. Factory reset There are two ways of factory reset procedure. One is completely reset back to factory default setting.
  • Page 63 When press Backup button, SMAX camera will back up setting to your computer. When press Backup to SD card device button, SMAX camera will back up setting to your SD card. 5.6.4. Restore SMAX camera can also restore your back up setting from above procedure.
  • Page 64 5.6.5. Upgrade SMAX camera contain its original firmware version when first leave the factory. If for any reason, such as debug or new features, SMAX will put the latest firmware version on SMAX website for download and upgrade purpose. Firmware upgrade procedure:...
  • Page 65 Chapter 5. 5.7. Camera Information SMAX network camera provide two ways of checking information. One is for the device information, it includes the fundamental of network setting and basic function of the camera. The other one is system log, it records all the operation or event history.
  • Page 66 Chapter 5. 5.7.2. System Log System log display procedure: To access system log, click Configuration from the menu then click Log button. You can check the usage log of this camera as shown in the picture from the right. w w w . s m a x . c o m . t w P 63...
  • Page 67 Chapter 5. w w w . s m a x . c o m . t w P 64...
  • Page 68 Chapter 5. w w w . s m a x . c o m . t w P 65...
  • Page 69 Chapter 6. 6.1. URL SMAX HTTP API Version: 1.0.10 Style Convention In URL syntax and in descriptions of CGI parameters, text in italics within angle brackets denotes content that should be replaced with either a value or a string. When replacing the text string, the angle brackets must also be replaced. URL syntax is written with the word “Syntax:”...
  • Page 70 Chapter 6. F/W Version:XXXXXX PT Support:Yes IO Trigger Support:Yes ..\r\n 6.1. URL FAIL HTTP/1.1 200 OK\r\n Content-Type: text/plain\r\n 6.1.1. System Content-Length: <content length>\r\n \r\n 6.1.1.1. Get Device information Request failed: <error message>\r\n Syntax: --------------------------------------------------------------------------- 6.1.1.2. Add, modify and delete users http://camera_ip:port/cgi/admin/serverreport.cgi --------------------------------------------------------------------------- Syntax:...
  • Page 71 Chapter 6. Return: HTTP/1.1 200 OK\r\n 6.1.1.2. Add, modify and delete users Content-Type: text/plain\r\n Content-Length: <content length>\r\n <parameter>=<value> Value Description \r\n action=<string> add, remove = remove an OK\r\n update, existing account if it exists. remove , get = get a list of the users FAIL HTTP/1.1 200 OK\r\n which belong to the...

  • Page 72: System Date And Time

    Chapter 6. <parameter>=<value> Value Description timezone=<string> 0-56 Specify the time zone for 6.1.1.3. System date and time the new date and/or time. device will translate the Get or set the system date and time time into local time using Syntax: whichever the time zone --------------------------------------------------------------------------- has been specified through...
  • Page 73 Chapter 6. Return: 6.1.1.3. System date and time FAIL HTTP/1.1 200 OK\r\n Content-Type: text/plain\r\n Examples(a) : Get system date and time Content-Length: <content length>\r\n http:// camera_ip:port r/cgi/admin/date.cgi?action=get \r\n Return: Request failed: <error message>\r\n HTTP/1.1 200 OK\r\n Content-Type: text/plain\r\n 6.1.2. Maintenance Content-Length: <content length>\r\n \r\n 6.1.2.1.
  • Page 74 Chapter 6. Example: --------------------------------------------------------------------------- 6.1.2.2. Factory Default POST /cgi/admin/firmwareupgrade.cgi HTTP/1.1\r\n Return: Content-Type: multipart/form-data; boundary=AsCg5y\r\n HTTP/1.1 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <content length>\r\n Content-Length: <content length>\r\n \r\n \r\n --AsCg5y\r\n OK\r\n Content-Disposition: form-data; name="firmware.bin"; filename="firmware.bin"\r\n FAIL HTTP/1.1 200 OK\r\n Content-Type: text/plain\r\n Content-Type: application/octet-stream\r\n Content-Length: <content length>\r\n \r\n \r\n...
  • Page 75 Chapter 6. 6.1.3. Video 6.1.2.3. Factory Default 6.1.3.1. MJPEG Syntax: Syntax: --------------------------------------------------------------------------- --------------------------------------------------------------------------- http:// camera_ip:port /cgi/admin/restart.cgi http:// camera_ip:port /cgi/mjpg/mjpeg.cgi --------------------------------------------------------------------------- --------------------------------------------------------------------------- Example: Example: http:// camera_ip:port /cgi/admin/restart.cgi http:// camera_ip:port /cgi/mjpg/mjpeg.cgi Return: Return: HTTP/1.1 200 OK\r\n HTTP/1.1 200 OK\r\n Content-Type: text/plain\r\n Content-Type: multipart/ Content-Length: <content length>\r\n mixed;boundary=myboundary\r\n \r\n...
  • Page 76 Chapter 6. Offset Parameter Size(Byte) Description 0x14 Format Bit6-8 sample rate 6.1.3.1. MJPEG 0: 8K Return: 1: 11K 2: 24K FAIL HTTP/1.1 200 OK\r\n 3: 44K Content-Type: text/plain\r\n 4: 48K Content-Length: <content length>\r\n Bit9-10 channel \r\n 1: 1 channel Request failed: <error message>\r\n 2: 2 channels Bit11-31 packet length in Payload Header Format:...
  • Page 77 Chapter 6. 6.1.3.2. MPEG4/H.264 Syntax: 6.1.3.1. MJPEG --------------------------------------------------------------------------- Payload Header Format: http:// camera_ip:port /cgi/mpeg/stream1.cgi Offset Parameter Size(Byte) Description --------------------------------------------------------------------------- 0x14 Format For Video: Example: Bit0-3 type http:// camera_ip:port /cgi/ mpeg/stream1.cgi 15: (reference to Bit26-29) Return: Bit8-13 frame rate (1-30) The same as MJPEG except payload data is Bit14-21 IP ratio (1-30) Bit22-25 quality level (0 - 4) MPEG4/H264.
  • Page 78 Chapter 6. FAIL HTTP/1.1 200 OK\r\n Content-Type: text/plain\r\n 6.1.3.2. MPEG4/H.264 Content-Length: <content length>\r\n Return: \r\n Request failed: <error message>\r\n FAIL HTTP/1.1 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <content length>\r\n 6.1.5. Audio \r\n Request failed: <error message>\r\n 6.1.5.1. Audio Query Syntax: 6.1.4. Snapshot --------------------------------------------------------------------------- Syntax: http://<servername>/cgi/query/query.cgi?<parameter>...
  • Page 79 Chapter 6. 6.1.5.3. Audio (Talk:PC to IP video device) Returns a multipart audio stream. Open a 6.1.5.2. Audio (Camera to PC) IPPROTO_UDP socket and assign this socket to Syntax: port 5432. --------------------------------------------------------------------------- Audio support u-Law Data only. http://<servername>/cgi/audio/audio.cgi? type=uLaw Payload Format: --------------------------------------------------------------------------- Header (12Bytes) u-Law Data (1024 Bytes)
  • Page 80 Chapter 6. Return: HTTP/1.1 200 OK\r\n 6.1.6. Focus & Zoom for Motor Lens Content-Type: text/plain\r\n (for GV1、GU1 only) Content-Length: <content length>\r\n Focus & Zoom for Motor Lens : \r\n Send focus & zoom control command to IP Camera <Result> which with Motor-Lens. \r\n Syntax: FAIL...
  • Page 81 Chapter 6. 6.1.7. SD Card Management 6.1.6. Focus & Zoom for Motor Lens Get SD Card Status and search result list. (for GV1、GU1 only) Syntax: --------------------------------------------------------------------------- Example: (Server sends setup to network camera.) http://camera_ip:port/sdcard.cgi?action=<action_para [Smart Focus] meter>&<parmameter>=<value>& http://192.168.101.102:80/cgi/fz --------------------------------------------------------------------------- /focuszoomctl.cgi?smartfocusscan with the following parameters and values for reference: Example: (Server sends setup to network camera.)
  • Page 82 Chapter 6. Example: (Get SD Card Status.) [Get SD Card Status] 6.1.7. SD Card Management http://192.168.101.102:80/sdcard.cgi?action=status& Return: Parameter Value Description sTime yyyy-mm-dd-hh-mm-ss List Start Time [Status] 1 : SD Card is available eTime yyyy-mm-dd-hh-mm-ss List End Time 0 : SD Card is not available fname filename Download/Delete File...
  • Page 83 Chapter 6. Example: (Download File.) [Download File] 6.1.7. SD Card Management http://192.168.101.102:80/sdcard.cgi?action=downloa Example: (Get File List.) d&dir=record&fname=5MP_IP_BOX [SD Card File List] -03212012-142806.avi& http://192.168.101.102:80/sdcard.cgi?action=list&key= Return: name&order=ascend&dir=record& None ch=1&page=1&sTime=2010-02-22-00-00- 00&eTime=2020-03-21-00-00-00 Example: (Delete File.) Return: [Delete File] http://192.168.101.102:80/sdcard.cgi?action=delete&d [Path],[Total File],[Total Page],[List Page],<File name|File ir=record&fname=5MP_IP_BOX-03 Time|File 212012-142806.avi&...

  • Page 84: Technical Specifications

    Chapter 6. Video Codec H.264 30fps @ 1920 x 1080 (Max. 1080P) 6.2. Technical Specifications MPEG-4 20fps @ 1920 x 1080 (Max. 1080P) MJPEG 30fps @ 720 x 480 (Max. D1) System Codec Quality H.264: 5 Levels (Max. 1080P) TI Multimedia SoC Bit Rate (Max.
  • Page 85 Chapter 6. Special Features Motion Detection 3 Scalable Windows 6.2. Technical Specifications Privacy Mask 3 Scalable Windows Continue Recording Remote Client Recording Event and Alarm Operation SD Card Recording Video Motion Detection, Digital Input Alarm Trigger (Always / Schedule setting) Remote Samba (/NAS) Recording FTP, Email, SD Card Rec., NAS Rec., Exposure Management...

  • Page 86: Onvif Supports List

    Chapter 6. 6.3. Onvif Supports List 6.3.1. NVR SMAX Camera NVR Models Motion SD Card Brand Version Model FW ver. NVR Onvif Live View Playback DIDO Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x SMAX V1.1 V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x...
  • Page 87 Chapter 6. 6.3. Onvif Supports List 6.3.1. NVR SMAX Camera Motion SD Card Brand Models Version Model FW ver. Live View Playback DIDO Onvif Detection recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x QNAP VS-xxxxx V5.0.0 /VioStor Products V1.03.20x /V4.3.x V1.03.20x V1.03.20x...
  • Page 88 Chapter 6. 6.3. Onvif Supports List 6.3.1. NVR SMAX Camera Motion SD Card Brand Models Version Model FW ver. Live View Playback DIDO Onvif Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x RSxxxx V1.03.20x DSxxxx Synology Products V5.0xx V1.03.20x V1.03.20x V1.03.20x V1.03.20x...
  • Page 89 Chapter 6. 6.3. Onvif Supports List 6.3.1. NVR SMAX Camera NVR Brand Motion SD Card Models Version Model FW ver. Live View Playback DIDO Onvif Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x DS7600 DS7700 V1.03.20x HIKVISION DS8600 V1.03.20x DS9600 Products V1.03.20x...
  • Page 90 Chapter 6. 6.3. Onvif Supports List 6.3.2. VMS SMAX Camera Motion SD Card Brand Models Version Model FW ver. Live View Playback DIDO Onvif Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x SMAX SMAX V1.1x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x...
  • Page 91 Chapter 6. 6.3. Onvif Supports List 6.3.2. VMS SMAX Camera Motion SD Card Brand Models Version Model FW ver. Live View Playback DIDO Onvif Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x NEXT V1.03.20x Intellect axxonsoft Enterprise V1.03.20x Products V1.03.20x V1.03.20x V1.03.20x...
  • Page 92 Chapter 6. 6.3. Onvif Supports List 6.3.2. VMS SMAX Camera Motion SD Card Brand Models Version Model FW ver. Live View Playback DIDO Onvif Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x NEXT V1.03.20x Intellect axxonsoft Enterprise V1.03.20x Products V1.03.20x V1.03.20x V1.03.20x...
  • Page 93 Chapter 6. 6.3. Onvif Supports List 6.3.2. VMS SMAX Camera Motion SD Card Brand Models Version Model FW ver. Live View Playback DIDO Onvif Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V6.11 Symphony Aimetis Products V6.12 V1.03.20x V1.03.20x V1.03.20x V1.03.20x...
  • Page 94 Chapter 6. 6.3. Onvif Supports List 6.3.2. VMS SMAX Camera Motion SD Card Brand Models Version Model FW ver. Live View Playback DIDO Onvif Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x Crystal NUUO Products V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x...
  • Page 95 Chapter 6. 6.3. Onvif Supports List 6.3.2. VMS SMAX Camera Motion SD Card Brand Models Version Model FW ver. Live View Playback DIDO Onvif Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x VAST VIVOTEK v1.8.x Products V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x...
  • Page 96 Chapter 6. 6.3. Onvif Supports List 6.3.3. CMS SMAX Camera Motion SD Card Brand Models Version Model FW ver. Live View Playback DIDO Onvif Detection Recording V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x SAMX SMAX V1.1x CMS512 V1.03.20x V1.03.20x V1.03.20x V1.03.20x V1.03.20x...

  • Page 97: Liability

    Chapter 6. 6.4. Liability SMAX Technology Co., Ltd. does not responsible WEEE Directive & Product Disposal for any printing errors or any related issues. And At the end of its serviceable life, this product should not be hereby to claim that all specification or description treated as household or general waste.

  • Page 98: Copyright

    SMAX Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes.

Table of Contents