Table of Contents
Advertisement
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-888-3KOBALT (1-888-356-2258),
8 a.m. - 8 p.m., EST, Monday - Friday.
CC
PART
BB
Kobalt 40V Fastening knob
Kobalt 40V Fastening clamp
CC
L
Kobalt 40V Dual Line Spool Cover
BB
DESCRIPTION
Kobalt
is a registered trademark of LF, LLC. All Rights Reserved.
®
19
PART #
34113877A
3304877A3
34121186-5
kobalttools.com
L
Printed in China
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KST 120X-06 and is the answer not in the manual?
Questions and answers
To get the line to feed
To get the line to feed on a Kobalt KST 120X-06:
1. Remove the battery for safety.
2. Turn the trimmer over to access the spool.
3. Remove the spool cover by pressing the two tabs on the sides.
4. Replace the spool with a new pre-wound or re-wound spool.
5. Insert the line ends through the spool housing openings.
6. Align the spool cover tabs with the slots in the spool housing.
7. Push down on the spool cover to lock it in place.
8. To advance the line when initially installed, pull the line while pressing it.
This answer is automatically generated