PIAGGIO Beverly Tourer 125 Service Station Manual page 80

Electrical system
Fuses
The electrical system is equipped with:
1. Four protection fuses «A» plus two fuses not
used located inside the right side fairing;
2. Four protection fuses «B» located inside the
glove-box on the left upper part of the compart-
ment.
The chart shows the position and characteristics
of the fuses in the vehicle.
CAUTION
BEFORE REPLACING A BLOWN FUSE, FIND AND SOLVE
THE FAILURE THAT CAUSED IT TO BLOW. NEVER TRY
TO REPLACE THE FUSE WITH ANY OTHER MATERIAL
(E.G., A PIECE OF ELECTRIC WIRE).
CAUTION
MODIFICATIONS OR REPAIRS TO THE ELECTRICAL SYS-
TEM, PERFORMED INCORRECTLY OR WITHOUT STRICT
ATTENTION TO THE TECHNICAL SPECIFICATIONS OF
THE SYSTEM, CAN CAUSE ERRORS IN FUNCTIONING
AND RISK OF FIRE.
1
2
ELE SYS - 80
FUSES
Specification
Fuse No. 1
Fuse No. 2
Beverly Tourer 125
Desc./Quantity
Capacity: 3A
Protected circuits:Fuel electric pump control device.
Fuse No. 2
Capacity: 7.5 A