Panasonic WV-CP500 Installation Manual page 20

m
Adjust the camera angle by loosening the screw of the camera mount bracket
while viewing the video monitor.
Be sure to loosen the screw of the camera mount bracket when the camera angle is adjusted.
If the camera angle is changed when the screw is tight, excessive force is applied to the cam-
era mount bracket and camera, and accordingly they may be damaged. Be sure to tighten the
screw securely after camera angle adjustment.
,
Adjust the focus.
To use the varifocal lens/zoom lens
• Reset the back focus position to the CS mount default position before the back focus adjust-
ment (Press the right and left buttons simultaneously for more than 2 seconds, or move the
cursor to "MANUAL-ADJ" of "BACK-FOCUS" in the setup menu and press the right and left
buttons simultaneously for more than 2 seconds after pressing the setting button.).
• Be aware that the adjustment method varies with varifocal lens or zoom lens models. For fur-
ther information, refer to the operating instructions for the lens.
• The adjustment procedure for general varifocal lenses is described as follows: For further infor-
mation, refer to the operating instructions for the lens to be used.
q Display a subject that exists as far as possible to adjust the back focus (10 m or more rec-
ommended).
w For 8-, or 10-fold magnification lenses, adjust the back focus (☞ see below) after setting
the zoom to the WIDE end and setting the focus to the FAR end.
For 2-, or 3-fold magnification lenses, adjust the back focus (☞ see below) after setting the
zoom to the TELE end and setting the focus to the FAR end.
e Adjust the view angle and focus coarsely by adjusting the zoom and focus of the lens to
center a subject in the screen, and then perform the main adjustment of the back focus (☞
see below).
To use a fixed-focal lens
• For a fixed focus lens with focus adjustment, adjust the back focus (☞ see below) after setting
the focus of the lens to the FAR end.
How to adjust the back focus
Use the operation buttons (☞ pages 9 and 10) for this adjustment.
The back focus is also adjustable in the setup menu. Refer to the operating instructions (PDF)
for further information.
q Press the setting button after adjusting the view angle while viewing the video monitor.
w The focus position indicator is displayed in the lower part of the screen, and the back focus
is automatically adjusted.
NEAR
......... | ..........
INDICATOR XXXX FOCUSING
20
FAR