Panasonic AG-HMX100P Operating Instructions Manual page 62

POS. X 128 Y 128
Z 196
EVENT ME TIME
00 01:00
E F
VIDEO EFFECTS
MOSAIC
OFF
DEFOCUS LEVEL
OFF
MONO
OFF
TIME
EFFECTS OFF
DECAY TIME
OFF
PAINT LEVEL
OFF
NEGA Y C
OFF OFF
MIRROR H V
OFF OFF
Scroll the screen to display.
[MOSAIC]
The mosaic effect can be applied to input video.
The following diagram shows an example of the mosaic
effect.
Mosaic effect
Rotary 1 Rotary 2 Rotary 3
MOSAIC
OFF
OFF XY
ON X
Y
Select [ON] or [OFF] to specify whether or not to apply the
effect using the rotary 2 control.
The factory default setting is [OFF].
Set the direction of applying the mosaic effect to [XY]
(horizontal and vertical), [X] (horizontal only), or [Y] (vertical
only) using the rotary 3 control.
Set [SIZE] in the range of 0 to 31 using the rotary 4 control.
The factory default setting is 8.
This size setting is applied to Nos. 1001, 1002, and 1003
(200, 201, and 202) patterns.
14
PATTERN INT
3001 WHT
CH A
SIZE
XY 8
2
16
4
Rotary 4 Rotary 5
SIZE
XY 0
0-31
[DEFOCUS]
The video effect of purposely displacing the focus can be
set to perform fantastical rendering or get the attention of
viewers.
The following diagram shows an example of the defocus
effect.
Defocus effect
Rotary 1 Rotary 2 Rotary 3
DEFOCUS LEVEL
OFF
OFF 0-7
ON
Select [ON] or [OFF] to specify whether or not to apply the
effect using the rotary 2 control.
The factory default setting is [OFF].
Set [LEVEL] in the range of 0 to 7 using the rotary 3 control.
The factory default setting is 2.
This level setting is applied to No. 1004 (203) transition
pattern. This effect cannot be activated with any two-
dimensionally compressed pattern at the same time.
 NOTE
Either mosaic or defocus can be selected. Whichever is
selected later has priority and the other selected earlier is
canceled.
[MONO]
Chroma (color) can be deleted to generate monochrome
video.
Rotary 1 Rotary 2 Rotary 3
MONO
OFF
OFF
ON
Select [ON] or [OFF] to specify whether or not to apply the
effect using the rotary 2 control.
The factory default setting is [OFF].
This setting has a priority over the settings made in the
[COLOR EFFECTS] menu ( page 13).
Rotary 4 Rotary 5
0
Rotary 4 Rotary 5