Content VoiceLink Included in delivery Intended use General notes on safety Before you start Using the VoiceLink Maintenance and care Disposal information Technical information Bluetooth Technical Data...
Included in delivery VoiceLink: Clip and self adhesive tape: Microphone: Cord manager: USB-power supply with country specific adapters Cables: 1.8 m audio cable with 3.5 mm stereo plug and a ■ 2.5 mm stereo plug 0.3 m audio cable with 3.5 mm stereo plug and a ■...
Furthermore, it is intended to make devices without Bluetooth-function compatible to Bluetooth. Read and follow the instructions of this user guide to avoid injuries or damage to the VoiceLink. Symbols: Be aware of information marked with the warning symbol WARNING, CAUTION or NOTICE!
General notes on safety WARNING Wireless systems may interfere with measuring devices and electronic equipment. Turn your device off when in hospitals or airplanes. Prior to use in conjunction with an electronic implant or life supporting system, have the electromagnetic compatibility verified. NOTICE Your device is sensitive to extreme heat, high humidity, strong magnetic fields (> 0.1T), X-rays...
Before you start The VoiceLink is equipped with a rechargeable battery. Connect the VoiceLink to a power supply or charge if necessary. Charging Charge the VoiceLink using the supplied USB-power supply. LED state while charging: VoiceLink on VoiceLink off Microphone mode flashes red-purple...
Page 9
Clean surface before applying clip or adhesive tape. Use with microphone Use the supplied clip to affix the VoiceLink to your shirt for mobile applications. Connect the VoiceLink with the microphone. Use with stationary device Use the supplied adhesive tape to affix the VoiceLink at a suitable place, if you want to use it for television or other stationary devices.
VoiceLink off and on. Audio mode Press on/off switch to turn the VoiceLink on. Be sure that the VoiceLink is in audio mode (LED shines blue). If the VoiceLink is in microphone mode (LED shines purple) press the sound level button until the LED...
Page 12
In audio mode the LED on the VoiceLink flashes blue while searching for a connection to your miniTek and shines blue constantly once a connection is established. Microphone mode Press on/off switch to turn the VoiceLink on. Be sure that the VoiceLink is in microphone mode (LED shines purple).
Maintenance and care NOTICE Do not put your device in water! Do not clean your device with alcohol or benzine. Clean the VoiceLink as necessary with a soft tissue. Avoid abrasive cleaning liquids with additives such as citric acids, ammonia, etc.
Disposal information Within the European Union, the marked equipment is covered by "Directive 2002/96/EC of the European Paliament and of the Council of 27 January 2003 on waste electrical and electronical equipment." Amended by "Directive 2003/108/EC" (WEEE). Recycle devices, batteries and accessories according to national regulations.
Technical information VoiceLink FCC: QWOBTA-132 IC: 4460A-BTA132 C-Tick: N14203 CE, FCC, IC and C-Tick compliance information can be found on the back of the instrument. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules.
Page 16
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. ■ Increase the separation between the equipment and ■...
Bluetooth Bluetooth is a wireless standard that provides a way to connect wireless devices like cell phones, TV, headsets and others. The Bluetooth connection has a range up to 20 m (65 ft). Walls or objects between the devices can shorten the distance.
Technical Data VoiceLink Input voltage (Mini USB) 5 VDC Input current (Mini USB) max. 200 mA Operating conditions: min. 0°C to max. 45°C Storage conditions: min. -10°C to max. 45°C, low humidity Mini USB Power supply Output voltage: 5 VDC Output current: min.