Before using for the first time
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml. It is set to a recommen‐
ded setting of approx. 3 ml at the facto‐
ry.
The dosage can turn out to be higher
than the set value due to the automatic
adjustment of the Sensor wash pro‐
gramme.
If spots appear on crockery and glass‐
ware:
Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
Decrease the rinse aid dosage.
28
Switch the dishwasher off with the
button if it is switched on.
Press the Start button in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the button 3 times.
The indicator will flash rapidly 3
times at intervals.
The dosage set will appear in the dis‐
play after the .
will flash in the display. This means
that the rinse aid dosage has been set
to 3 ml (factory default).
If you wish to change this setting, use
the Start button.
Each press of the button moves you
up a level. When the highest rinse aid
level is reached, the setting starts
from the beginning again.
The setting is now stored in memory.
Switch the dishwasher off with the
button.