Io Alarm - Foscam FI9828W User Manual

Click the week day words, the corresponding column will be selected. For example, click TUE, the all column
of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the
camera will alarm.
③ Press the left mouse and drag it on the time boxes, you can select the serial area,
Step 07: Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the camera will alarm and
adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.

4.5.2 IO Alarm

This IP camera provides a I/O alarm terminal block which is used to connect to external input / output device.
The alarm device(door sensor, infrared sensor, smoke detectors, etc) send input command to the network
camera, then the network camera send output command to the alarm output device(local audible alarm, lights
alarm,etc.).
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 4.57
Figure 4.58
www.foscam.com
65