Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for KIAM Aquarius Contractor
Summary of Contents for KIAM Aquarius Contractor
- Page 1 Kiam Power Products Contractor Instructions Manual Read instructions manual before use! Equipmart Ltd Kiam House Birchill Road Knowsley Ind. Park North Merseyside L33 7TD United Kingdom T: 0044 151 548 5500 © Equipmart Ltd F: 0044 151 548 5599 www.kiamproducts.co.uk...
-
Page 2: Parts List
1. Parts List Power Cord Hook Top Handle Power On/Off Switch Motor Switch Vacuum Adjuster Air Outlet Socket Vacuum Head Clip Float Cylinder Clip Holder Stainless Tank Hose Inlet Socket Water Drain Hose Trolley Handle Fresh Water Tank Quick Connector Female Power Cable Twin Pump Switches Power Socket... -
Page 3: Specification
Carpet Tool Upholstery Tool Applicable for carpets, Applicable for small areas rugs and floors. such as seats and spillages. 3. Specification Model: Aquarius Contractor Voltage: 230V Current: 2400W (1200W Per Motor) Motor Power: 2.5m³/min. Air Flow: 100W (50W Per Pump) -
Page 4: How To Operate
4. How to Operate 1. Unscrew the cap on the detergent tank and pour in fresh water and detergent. Screw the cap back on. 2. Insert the vacuum hose into the hose coupler and connect detergent tube into the quick release connector. To disconnect the hose, push the button on the hose coupler and remove the hose (as below). - Page 5 3. Insert and push the male quick connector from the vacuum hose into the female quick connector on the machine. To disconnect the quick connector, push back the female quick connector to eject the male quick connector. 4. Connect the stainless steel tube into the suction hose connector. Connect the detergent pipe into the suction hose and twist it in a clockwise direction to lock in place (as below).
- Page 6 6. When storing the machine you can wrap the power cable around the groove of hook (as shown in image ). Then twist the hook 90 degrees to keep the power cable in place (as shown in image 2). 7. Connect the power cable from the back of the vacuum head into the socket on the detergent pump cover. Connect the power cable from the detergent pump cover into a mains socket.
- Page 7 9. Press the trigger on the vacuum hose to spray detergent. 10. For the blower function simply plug in the vacuum hose into the back of the vacuum head. 11. To drain the waste water tank, un-clip the water drain hose from the tank, place the drain hose into the drain and open the cap allow the water out.
- Page 8 12. To clean the air filter, simply remove air filter housing from the back of the vacuum head and take out the filter. Wash it with clean water and leave to dry. Always make sure the filter is completely dry before re-installing as you may cause damage to the machine.
-
Page 9: For Safe Operation
5. For Safe Operation 1. Don’t touch or operate the switches with wet hands as this may cause electric shock. 2. Don’t spray water/detergent at other people. 3. Don’t operate the machine outside in the rain as this may cause electric shock and/or damage to the machine. 4. - Page 10 If the machine is damaged, please call us on 0151 548 5500. Remove all liquid from the machine before lifting. When you are getting no spray from the nozzle, check the detergent pipe and connector for any blockages. Check there is enough water in the detergent tank. Check if the pump is working correctly. NEVER run the pumps without water as this will overheat the pumps causing damage to the pump.
Need help?
Do you have a question about the Aquarius Contractor and is the answer not in the manual?
Questions and answers