This vacuum cleaner is designed to be safe when used for cleaning functions as specified. Should damage occur to electrical or mechanical parts, the cleaner and/or accessory should be repaired by a Kiam Authorised service agent or the manufacturer, before use, in order to avoid further damage to the machine or physical injury to the user.
Page 3
2. Starting And Operating The Machine Check that all power switches are in the off position. Connect the suction hose into the suction inlet of the machine by pushing the hose forward until the pin clicks in to place at the inlet (to release the hose from machine just pull the pin upwards and then pull out the hose).
6. Warranty The manufacturer provides warrantly in accordance with the legislation of the customer’s own country of residence with 12 months starting from the date on which the appliance is sold to the end users. The warrantly only covers defects in material or workmanship. Repairs under warranty may only be carried out by an authorized service centre.
9. Troubleshooting PROBLEM CAUSES SOLUTIONS Check the electric power Power cord is disconnected supply line is connected to your wall socket correctly Check that the vacuum is turned on. To The vacuum cleaner fails Vacuum is not switched ON turn on the vacuum press any of the to start on/off switches to the on position Contact an authorised...
Need help?
Do you have a question about the CYCLONE and is the answer not in the manual?
Questions and answers