NEC Univerge SV8100 System Hardware Manual page 340

Issue 4.1
5 - 82
17. Push the latch to release the cover (see
the Bottom Unit
cable and close the cover.
18. Cut or trim the supplied coupled device for the tilt legs handset
option.
19. Insert the stopper coupled device into the right and left tilt legs
(see Figure 5-101 Insert Stopper for Handset
Figure 5-101 Insert Stopper for Handset Use
20. Set the coupled device for tilt legs into position.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Cable). Stow the extra bottom unit connecting
Figure 5-100 Stowing the Bottom Unit Cable
UNIVERGE SV8100
Figure 5-100 Stowing
Use).