Install Tilt Legs - NEC Univerge SV8100 System Hardware Manual

Issue 4.1
5 - 42
4. Lift and remove the Tilt Legs.
4.9.2

Install Tilt Legs

1. Place the telephone on a flat surface (button side down).
2. Lay the adjustable Tilt legs on top of the telephone. See
5-40 Attach Tilt Legs to DT300/DT700 Series
Figure 5-40 Attach Tilt Legs to DT300/DT700 Series Terminal
3. Push the Tilt Legs upward until they snap into place.
4. Lift both ends of Tilt Legs until they come together (refer to
Figure 5-41 Connecting the Tilt Legs on page
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
UNIVERGE SV8100
Figure
Terminal.
5-43).